Jamboree Playground Tiles - Designer Series

Description - These recycled rubber playground tiles are made in the US and are designed to keep kids safe when playing on jungle gyms, swing sets, and other playground equipment or athletic areas. What sets these premium playground surfaces apart from the normal Play Ground safety tiles a top layer that is 20% more dense than other tiles or poured surfaces giving you unrivaled durability with many color options keeping your playground surface beautiful for years to come. This rubber playground surface exhibits excellent resistance to weathering and aging, and also has three different thicknesses, 1", 2 ½” and 4 ¼”, to help ensure the safety of children from different fall heights. They also provide a clean and safe alternative to wood and playground rubber mulch. This playground surface can be used indoors as well as outdoors and when installed correctly, provide proper drainage.

Material – Our premium playground rubber tiles are composed of a high-quality recycled SBR rubber base and a colored EPDM rubber granules bound top surface complete with a wear and weather resistant polyurethane. The colorful surface layer is made from EPMD virgin rubber that will not bleed and is much more color stable compared to pigmented playground tiles. These tiles can fade slightly in direct sunlight over time.

Size – Tiles are 24” x 24.” See below for dimensions of all accessory options.

Thickness – 1" (2 foot fall height rated), 2.5” (6 foot fall height rated), 4.25” (8 foot fall height rated)

Weight – 16, 26 or 36 pounds (may vary slightly depending upon color choice and thickness)

Recommended Uses – These tiles have been used successfully in school and park playgrounds, in community playgrounds, in skateboard parks, rock climbing walls, community play areas for children, as decks and patios, on rooftops, in day care centers, as indoor and outdoor walk ways and paths, and any other place where a fall absorbing playground or general rubber surface would be beneficial.

Accessory Dimensions:

• Use 6 Dowels per tile for 1" tiles
• 1" reducer is 4" x 48"
• Quad Block is 8" x 8"
• 2.5" reducer is 48" x 8"
• 2.5" ADA ramp is 24" x 24"
• 2.5" L/R side reducer for ADA ramp is 24" x 8"
• 2.5" outside 45 deg. corner reducer is 16" x 8"
• 2.5" inside 45 deg. corner reducer is 12" x 8"
• 2.5" outside 90 deg. corner reducer is 16" x 8"
• 2.5" inside 90 deg. corner reducer is 24" x 24"
• 4.25" reducers are 48" x 12"

Accessory Note – Accessory pieces for designer series jamboree playground tiles include a 20% color fleck blend.

To clean and maintain our pigmented playground tiles, a routine cleaning with a power washer (not to exceed 2000psi) or scrubbing machine and mild detergent (non-petroleum base) will maintain an attractive and long-lasting appearance.

Note: Do not use any solvent or oil style cleaners such as Pinesol, Lysol, Murphy’s Oil Soap, WD40, paint thinner, etc. since these types of cleaners will break down the outdoor playground rubber surface over time.