– Our DuraFlo Drainage Tiles are the perfect DIY solution for where drainage is needed. These tiles are designed for both indoor and outdoor use. They are 3/4" thick and so durable that they are backed by an industry-leading 15-year warranty! These 15.75" x 15.75 tiles are slip-resistant and will withstand the harshest of environments. Did we mention all 18 colors are UV stable? Made in the USA! It doesn't get much better than this. Order your DuraFlo Drainage Tiles today.
||Impact Resistant Polypropylene
||15.75” x 15.75”
|Weight per tile
||~1.6 Lbs. per tile
|Made in the USA
|Mold & mildew resistance
Recommended Uses - DuraFlo Drainage Tiles are built to be a multi-use durable floor tile. These tiles are most commonly used as indoor/outdoor patios, around pools, locker rooms, laundry rooms, kennels, showers, locker rooms, boats, boating docks, car dealerships, event floors, gyms, offices, or anywhere a drainage solution is needed.
Available For Order - Ships between Dec 13 - 15
DuraFlo interlocking tiles are easy to maintain. Cleaning of these multi-use tiles typically includes:
- Vacuuming or sweeping any loose crumbs, dust, or debris from the tiles when necessary.
- Hose off or damp mop the floor tiles with a mild soap and water mixture for tough or caked on dirt and/or stains.
DuraFlo Drainage Tiles are easy to install. Installation of these floor tiles typically includes:
- Clean your sub floor so that it is free of all dirt, dust, grease, or other foreign material.
- When installing the hard plastic tiles, we recommend starting in the front left corner of the room and working your way out from there.
- Make sure the female side (loops) of the tile is facing away from the wall.
- After filling the left wall with tiles and the adjacent wall, proceed to fill the rest of the room with whole tiles.
- When you come up to a wall or object, don’t worry. Just measure the area and cut the tiles with a tile cutter or a power saw with a fine-toothed blade and put the trimmed tiles into place.
- When trimming the tiles into place, make sure you leave about a 3/4” space between the tiles and the wall or obstruction.
- Once the tiles are in place, you can then snap in the edge pieces, if you purchased them.