Description - VersaStep Dance Rolls are suitable for all popular styles of dance. This roll out flooring is durable and long-lasting and can be used with hard shoes for tap and all styles of ballet. Our VersaStep rolls have a controlled slip surface, allowing for the perfect balance of grip and speed. This budget-friendly flooring is competitively priced, making it ideal for personal use as well as larger studio use where a budget is important. VersaStep is truly versatile, an all-purpose dance flooring Marley roll.
Material – High-quality resilient vinyl sheet.
Width – 63" wide
Length – Available in pre-cut full roll sizing at 60' long or as custom cut. Custom cut rolls are cut to your desired length free of charge and in whole foot increments such as 11’, 12’, 13’, etc. You will normally receive an extra few inches on each roll. This allows for a quick and easy installation.
Thickness – ~1.5 mm
Installation – Temporary, Semi-Permanent, or Permanent
Floor Speed – Medium-Fast
Shoe Style – All shoe styles, hard or soft
Use With – Latex Dance Floor Adhesive, Double Stick Tape, Heavy Duty Cleaner, All-Purpose Cleaner and Vinyl Tape
Recommended Uses – VersaStep is the perfect roll out dance floor for personal studio spaces as well as professional dance studios. Recommended for practicing Tap, Ballet, Ballroom, Drill Team, Irish dance, Flamenco, Jazz, Lyrical dancing, Hip Hop, and much more.
In Stock - Ships between Oct 11 - 14
Vinyl rolls are easy to clean and maintain. Cleaning of this flooring typically includes:
- Sweeping or vacuuming any loose crumbs, dust, or debris from the floor when necessary.
- Light damp mopping to remove light staining or spills. Remove scuffs and excessive soil by carefully scrubbing.
- Avoid prolonged exposure to direct sunlight, as discoloration may occur. We recommend closing blinds or drapes during peak sunlight hours to prolong the life of the floor.
Note: This is not a stainproof product. Leaving certain harsh chemicals or spills on the floor for an extended time may cause some staining and/or damage. Always clean up a spill immediately to reduce the chance of staining or other damage to your flooring.
When installing rolled vinyl dance flooring, it is recommended that you use some kind of adhesive to prevent the rolls from moving around or sliding apart between adjacent rolls. The most common methods of adhering Marley dance floors to the sub floor are:
A: Double Sided Tape Installation
- First, clean your subfloor so that it is free of all dust, dirt, and debris.
- Loose lay your rolls in the room as you would like them to look after a complete installation. Let the rolls relax for up to 24-48 hours to ensure proper installation of your new flooring.
- Make any necessary cuts to the rolls to fit them into the room using a straight edge and a utility knife with a fresh blade. We recommend leaving a 1/4" gap around the rolls to account for expansion and contraction.
- You can either apply double-sided carpet tape to the underside of each roll around the roll perimeters. Then place the vinyl rolls back into position on top of the double-sided tape.
- Or you can use mat tape to secure rolls to the floor from the top, as well as joining multiple rolls together.
- Install shiny side down, matte side up. The dance surface (top) is textured slightly, called calendaring which looks like tiny goosebumps. Place vinyl rolls back into position on top of the double-sided tape.
B: Glue Installation
- First clean your subfloor so that it is free of all dirt, dust, and debris. Also, when gluing your flooring down, it is recommended that the subfloor is free of any moisture.
- Loose lay your rolls in the room as you would like them to look after a complete installation. Let the rolls relax for up to 24-48 hours to ensure proper installation of your new flooring.
- Make any necessary cuts to the rolls to fit them into the room using a straight edge and a utility knife with a fresh blade. We recommend leaving a gap around the rolls roughly the thickness of the rolls being used to account for expansion and contraction.
- Install shiny side down, matte side up. The dance surface (top) is textured slightly, called calendaring which looks like tiny goosebumps.
- Roll up the rolls at one end of the room. Put down a 10’ long light layer of adhesive and unroll 10’ of the flooring into the adhesive at a time.
- Repeat this step for every 10' of roll length until the entire roll has been unrolled into it desired position.
- After all the rolls have been glued down, it is often recommended to use a 100-Lb. roller on the floor to guarantee good adherence to the subfloor. If a roller is not available, walking on the flooring in small choppy steps may also work.
Note: It is normal to receive an extra few inches on each roll. This allows for potential material contraction from the time it is cut to the time of installation. Be sure to let product properly acclimate prior to installation.
