Description - Looking for a rubber flooring that's thick enough to cushion your every step, but won't break the bank? Look no further than our 8mm custom cut Strong Rubber Rolls! This versatile flooring option is perfect for both residential and commercial use, and it's our most popular thickness for a reason. It's like the Goldilocks of rubber rolls - not too thick, not too thin, but just right! And with our industry-leading 5-year warranty, you can rest assured that you're getting a product that's as tough as it is funny (which is pretty darn tough, if you ask us). So go ahead, get your bounce on - your feet will thank you!
Material – Recycled rubber buffings and colored EPDM virgin rubber flecks. Recycled rubber buffings are the “Filet Mignon” of the recycled rubber industry since they are the cleanest, strongest, and most consistent raw material as compared to some of the cheap recycled crumb rubber alternatives available.
Width – 4' wide per roll
Length – The 8mm rubber rolls are custom cut to each customer’s desired length. This feature is free of charge, provided that each roll length is at least 15’ or longer and ordered in whole increments (i.e., 15’, 16’, 17’, etc.). It is normal to receive extra inches on each roll as this allows for quick and easy installation.
Thickness – 8mm (Approx. 5/16")
Weight – 2.2 Lbs. per square foot.
Recommended Uses – Looking for a flooring solution that can do it all? Look no further than the custom cut 8mm Strong Rubber Rolls! With their nonslip surface and anti-fatigue qualities, these rolls are perfect for a wide variety of locations. Use them in your home gym or commercial weight room for added safety and comfort during workouts. They're also great for basement and playroom flooring, providing a soft surface for kids to play on. Plus, with their ability to withstand spike damage, they're an ideal choice for locker rooms and pet care facilities. And if you need a durable, nonslip surface outside, the 8mm Strong Rubber Rolls have you covered on decks, patios, boats, and boat docks. These rolls truly are the all-around, do it all flooring solution you've been searching for!
Note: – The confetti color is made from post-industrial recycled rubber. It is a mix of multiple colors with random color percentages. Due to this color density will vary.
In Stock - Ships between Jun 2 - 15
Keeping your 8mm Strong Rubber Rolls clean and looking their best is easy with these simple maintenance tips:
- Sweep or vacuum loose debris regularly to prevent buildup and minimize the risk of slips and falls.
- For a deeper clean, simply damp mop the rubber rolls with a mild soap and water solution. We recommend using Dawn dish detergent or Tide laundry detergent.
- Do not use any solvent or oil-based cleaners like Pinesol, Lysol, Murphy's Oil Soap, WD40, paint thinner, or similar products. These cleaners can break down the flooring over time and cause damage.
For more detailed cleaning instructions and commercial cleaning tips,
Click Here to download our comprehensive maintenance guide.
When installing rolled rubber flooring, it is important to choose the right installation method for your project. The most common methods of adhering rubber rolls to the subfloor are:
A: Double-Sided Tape Installation
- Ensure that the subfloor is clean, dry, and free of any debris.
- Loosely lay the rubber rolls in the room to achieve your desired layout. Allow the rolls to relax for 24-48 hours to ensure proper installation.
- Note: Rolls may be directional, so make sure the color matches on each roll. If the roll colors do not match, flip them or turn them 180 degrees to ensure the color matches.
- Cut the rubber rolls to fit the room using a straight edge and a utility knife with a fresh blade. Leave a gap around the perimeter roughly the thickness of the rolls being used to account for expansion and contraction.
- Roll up the rubber rolls at one end of the room. Apply double-sided tape to the subfloor along the perimeter of each roll.
- Place the rubber rolls back into position on top of the double-sided tape.
B: Glue Installation
- Ensure that the subfloor is clean, dry, and free of any debris or moisture.
- Loosely lay the rubber rolls in the room to achieve your desired layout. Allow the rolls to relax for 24-48 hours to ensure proper installation.
- Note: Rolls may be directional, so make sure the color matches on each roll. If the roll colors do not match, flip them or turn them 180 degrees to ensure the color matches.
- Cut the rubber rolls to fit the room using a straight edge and a utility knife with a fresh blade. Leave a gap around the perimeter roughly the thickness of the rolls being used to account for expansion and contraction.
- Roll up the rubber rolls at one end of the room. Spread a light layer of polyurethane adhesive that is 10 feet long (maximum) and unroll the flooring into the adhesive 10 feet at a time.
- Repeat step 5 for every 10 feet of roll length until the entire roll has been unrolled into its desired position.
- After all of the rolls have been glued down, it is recommended to use a 100-pound roller on the floor to guarantee good adherence to the subfloor. If a roller is not available, walking on the flooring in small choppy steps may also work.
For printable installation instructions, please
Click Here.