larger image
|
roll over image to magnify
 
 
 
 
 

3/8" Heavy Duty Rubber Rolls

Price from
$1.93 sqft
SAVE
25%
$7.72 linear foot
reg: $2.57 sqft
linear foot: $10.29

Proudly made in the USA
 
AVAILABLE FOR ORDER
Ships with in 5 - 7 business days
Color: roll over image to magnify
Black
Blue
Gray
Tan
Brick Red
Eggshell
Lipstick Red
Brown
Gold
Green
Orange
Purple
Teal
Lemon
Brown Tan
Blue Gray


ENTER ROOM SIZE
Width (ft):
x
Length (ft):
OPTION 1
OPTION 2
Each roll weighs lbs.
Each roll weighs lbs.

CUSTOM ROLL LENGTH Minimum cut length ft.
Total Length:
Enter desired roll lengths in whole foot increments.

Total Roll Length:
Total roll weight: lbs.
Each roll weighs lbs.
Minimum cut length 15ft.
sqft
$
$

Description - Our heavy duty commercial rolled rubber flooring is the highest quality rubber gym flooring available. It is built for extreme durability and can be found in many commercial weight rooms around the United States today. The rolls are machine cut for exacting standards and are easy to install. These rolls can be used indoors and out.
Material – Recycled rubber buffings and colored EPDM virgin rubber flecks. Rubber buffings are the “Filet Mignon” of the recycled rubber industry since they are the cleanest, strongest, and most consistent raw material as compared to some of the discount recycled crumb rubber alternatives available.
Width – Each roll is 4 feet wide.
Length – The rolls are custom cut to your desired length free of charge provided that each roll length is 15’ long or longer and in whole foot increments such as 15’, 16’, 17’, etc. You will normally receive an extra few inches on each roll. This allows for a quick and easy installation.
Thickness – 3/8 Inch
Weight – 2.2 Lbs. per square foot.
Origin – Made in the USA.
Recommended Uses –Heavy duty rubber rolls have been used successfully as home gym flooring, as commercial weight room flooring, under exercise equipment, in pet care facilities, as basement flooring, over radiant heated flooring systems, on outdoor patios and decks, as slip resistant flooring on boat docks, as children’s play room flooring, in locker rooms, and any other place where a rubber floor solution would be useful to help prevent slipping and provide anti-fatigue and sound control qualities.

  • Heavy duty rubber rolls have are ready to be cut to your desired lengths free of charge within 5-7 business days and are delivered in 7-12 business days.
  • An email will automatically be sent to you with your tracking information as soon as your rolled rubber ships and tracking information becomes available.

Heavy duty rubber rolls are very easy to clean. Maintenance of these rubber rolls typically includes:
  • Vacuuming any loose dust, dirt, or debris from the rubber flooring surface when necessary.
  • Occasional damp mopping of the rolls with a mild soap and water mixture. Some soaps commonly used include Dawn dish detergent and/or Tide laundry detergent.
Note: Do not use any solvent or oil style cleaners such as Pinesol, Lysol, Murphy’s Oil Soap, WD40, paint thinner, etc. since these types of cleaners will break down the flooring over time.

For more detailed cleaning instructions and commercial cleaning instructions, Click Here.

Installation of our rubber rolls is very simple and typically done by the consumer. When installing rolled rubber flooring, it is recommended that you use some kind of adhesive to prevent the rolls from moving around or sliding apart between adjacent rolls. Below are instructions for the two most common methods of adhering rubber rolls to your base floor.

Double Sided Tape Installation
  • First clean your sub floor so that is free of all dirt, dust and debris.
  • Loose lay out the rolls in the room as you would like them to look after complete installation. Note: Rolls can be directional so make sure the color matches on each roll. If the color does not appear to match, flip them or turn them 180 degrees to ensure the color matches.
  • Next you will want to let your rolls acclimate to the space they are being installed for at least 24-48 hours.
  • Now make any necessary cuts to the rolls to fit them into the room using a straight edge and a utility knife with a fresh blade.
  • Lift rolls and apply double sided tape to the perimeter of each roll.
  • Place rolls back into position on top of the double sided tape.

Glue Installation
  • First clean your sub floor so that it is free of all dirt, dust and debris.
  • Loose lay out the rolls in the room as you would like them to look after complete installation. Note: Rolls can be directional so make sure the color matches on each roll. If the color does not appear to match, flip them or turn them 180 degrees to ensure the color matches.
  • Next you will want to let your rolls acclimate to the space they are being installed for at least 24-48 hours.
  • Now make any necessary cuts to the rolls to fit them into the room using a straight edge and a utility knife with a fresh blade.
  • Next, roll up the rolls at one end of the room. Put down a 10 foot long light layer of polyurethane adhesive and unroll 10 feet of the flooring onto the adhesive. Repeat this step every 10 feet until the entire roll has been unrolled into its desired position.
  • After all rolls have been glued down, it is often recommended to use a 100 pound roller on the floor in order to guarantee good adherence to the sub floor. If a roller is not available, walking on the flooring in small choppy steps ensuring ever spot of flooring has been walked on can also work.

For printable installation instructions Click Here.

Highlights

  • Perfect for commercial gyms and weight rooms.
  • Highest quality rubber gym flooring available.
  • Industry leading 5 yr warranty.
  • Available in 16 colors.
  • Rolls from our West Coast facility may take 7-14 bus. days to ship out.

What Our Satisfied Customers Are Saying

Color:
Qty:
$0.00
$0.00
< Return to Product

Price From Our Price
per Case:
reg:
Price From Our Price
reg:
per Case:
Total Samples: First 3 Samples are FREE! $0.50 for each sample after.