Description - Looking for low-cost commercial grade gym tiles, look no further! Our Eco-Lock rubber tiles are available with detachable border pieces so that each tile can work as a border, corner, or center tile. These tiles are die-cut and available in 10 color options and are each backed by a 5-year warranty.
Material – Recycled SBR rubber and colored EPDM virgin rubber flecks.
Size – 24” x 24” (25" x 25" if detachable edge pieces are included).
Thickness – 1/4" and 8 mm thick (approx. 5/16")
Weight – 1/4" ~ 5.2 Lbs, 8mm tile ~ 8 Lbs.
Recommended Uses – Eco-Lock rubber tiles have been used successfully as flooring for home gyms, in commercial weight rooms, dog kennel facilities, basements, locker rooms, baseball dugouts, outdoor storage sheds, as ski lodge flooring, golf course clubhouse flooring, boathouse flooring, over radiant heated floors, and in a variety of other places where an anti-slip flooring with shock-absorbing properties would be beneficial.
Available For Order - Ships between Jul 8 - 15
If ordering 100 tiles or more of quick ship colors, the lead time is 7-10 business days.
Eco-Lock rubber tiles are very durable and easy to maintain and keep clean. Maintenance of these interlocking gym tiles typically includes:
- Vacuuming any loose crumbs, dust, or debris from the flooring surface when necessary.
- Occasional damp mopping of the floor tiles with a mild soap and water solution. A few recommended soaps are Dawn dish detergent or Tide laundry detergent.
Note: Do not use any solvent or oil style cleaners such as Pinesol, Lysol, Murphy’s Oil Soap, WD40, paint thinner, etc. since these types of cleaners will break down the flooring over time.
For more detailed cleaning instructions and commercial cleaning instructions, Click Here.
Installation of these interlocking tiles is very simple and usually done by the consumer. Typical installation of these tiles is as follows:
- First, clean your subfloor, so it is free of all dirt, grease, or debris.
- Start in one corner of the room with a corner tile and add border tiles outward along the adjacent walls.
- Leave the other two edges of the room open and fill in the rest of the room, adding center, corner, and border tiles where you see fit.
- After the open floor is covered, go back and cut in tiles along the opposite walls in the room. We recommend leaving a gap along the walls roughly the tiles' thickness being used to account for expansion and contraction of the floor in varied temperature ranges.
Note: When piecing interlocking tiles together, adhesives aren’t usually needed since the weight of the product is usually enough to keep the floor tiles from moving. However, if you do experience movement and would like to ensure that the tiles do not slide at all, you can use some double-sided tape or mat tape around the perimeter of the installation to prevent any movement.
For printable installation instructions, please Click Here.