Monthly Deals
Complete Your Order
Contact Us
8am - 8pm EST Monday - Friday
10am - 7pm EST Saturday

EZ Polyurethane Adhesive

Our Sale Price
$283.99 each
Your Savings
Save 25%
In Stock - Ships between Sep 28 - 29
Product Highlights
  • Zero VOCs and solvents.
  • 4-in-1 adhesive. Can be used as an adhesive, moisture barrier, sound control, and crack suppressant.
  • Easy to clean wet or dry.

  • Zero VOCs and solvents.
  • 4-in-1 adhesive. Can be used as an adhesive, moisture barrier, sound control, and crack suppressant.
  • Easy to clean wet or dry.
  • CRI Green Label Plus Certified.
  • Indoor use only.
  • Use with multi-ply engineered planks, solid wood planks, exotic woods, acrylic impregnated wood, bamboo, plain-back parquet, rubber, and plywood.
Description - Our EZ Polyurethane Adhesive is an MS polymer adhesive designed for use with our wood flooring. This adhesive is unique in that it can be used as a 4-in-1 system. What does that mean? It means that this glue can be used as a sound barrier, a moisture barrier up to 15 lbs of vapor emissions, and as a crack suppressant. These qualities make this adhesive the 'go-to' adhesive for both 'DIYers' and contractors alike. Our EZ Polyurethane Adhesive glue is free of any VOCs and solvents and is very easy to spread and apply. Plus, cleaning up this adhesive is just as easy as using it: for wet clean up, use a wet cloth for the mess. As for dry glue, use a tennis ball to clean it up.
Color - Light brown
Size - 4 gallon
Coverage - 20 sqft/gallon - 80 sqft/gallon depending on floor type. See the installation tab for more details.
Weight - Approximately 10 Lbs. per gallon
Recommended Uses - EZ Polyurethane MS polymer adhesive is great with multi-ply engineered planks, solid wood planks, exotic woods, carpet tiles, acrylic impregnated wood, bamboo, plain back parquet, and plywood.

In Stock - Ships between Sep 28 - 29

EZ Polyurethane Adhesive is easy to use. To ensure good adhesion, clean your subfloor and make sure it is flat and dry before applying the adhesive. For thorough instructions on how to properly maintain and use this adhesive, please Click Here.
When Used as Adhesive Only
Floor Type Trowel Coverage
Multi-ply engineered plank 3/8" up to 1/2" and 5/16" to 3/8" solid strip 3/16" x 3/16" x 5/32" square notch 50 sqft/gallon spread rate
5/16" solid parquet, 1/4" engineered plank 1/8" x 1/8" x 1/8" square notch 80 sqft/gallon spread rate
3/4" solid wood planks/shorts, 4' x 4' plywood 1/4" x 1/4" x 1/4" square notch 30 sqft/gallon spread rate
Greater than 1/2" engineered plank, 3/4" parquet, and solid plank greater than 3/8" up to 9/16" 1/4" x 1/4" x 1/8" square notch 35 sqft/gallon spread rate
Bamboo up to 5/8" in thickness 3/16" x 3/16" x 3/16" square notch 35 sqft/gallon spread rate
Recycled Rubber Flooring over Non-Porous Substrates 3/32" x 3/32" x 3/32" square notch 100 sqft/gallon spread rate

When Used as 4-In-1 System
Floor Type Trowel Coverage
Multi-ply engineered plank and plain-backed parquet 1/4" x 3/16" V notch 30 sqft/gallon spread rate
Bamboo (Vertical & Horizontal Only) up to 5/8" in thickness 1/4" x 1/4" V notch 30-35 sqft/gallon spread rate
Solid Wood Planks and Bamboo (Vertical & Horizontal Only) greater than 5/8" in thickness 1/2" x 15/32" V notch 20 sqft/gallon spread rate
We have Technical Specifications available for this product as well as MSDS. If you need any further information about this product, please feel free to contact us!
Don't see what you're looking for? 
Can the EZ Polyurethane Adhesive (DT 7700) be used with 1' thick Sports Play tiles being laid on an EPDM membrane outdoors on an elevated deck?
Our EZ Polyurethane Adhesive can be used outdoors under our 1" Sports Play Tiles.
I will be using this glue to affix 15mm impact rolls to concrete. The concrete is new. Based on the product instructions, I'm not clear: should the concrete be sealed prior to applying the glue or not? Once the rubber floor is down, I need to be sure that the concrete is impermeable in case an animal accidentally pees on the floor... I can't have the concrete soaking that up.
You do not have to seal the concrete to use our 7700 Series adhesive. To ensure that your concrete is totally impervious to liquids, we would recommend sealing the concrete. Even though the glue will prevent most liquids from going through or coming up, if there were a gap in the glue when applying it, there would be potential for liquids to get through. What you could also do is seal your rubber flooring with our Rubber Floor Finish and Sealer which will fill in the small pores in the floor. Between the rolls, we would recommend using our Seam Sealer glue. This will help to create a watertight flooring surface.
How effective is the EZ Polyurethane Adhesive with the Crete II product? I will be installing it in the garage.
Lori-Ann E Behrens
You can use our EZ Polyurethane Adhesive with our Crete II carpet tiles.
I would like to glue down your 1/4” thick 4’ x15’ roll to a raw steel tabletop; what glue do you recommend? I have had some bonding issues in the past. The specs on your urethane glue don’t have steel as an approved base.
Steel is not an approved subfloor or base when using our Polyurethane Glue. The issue is that the glue has a tough time bonding properly to steel. We have had customers use our Polyurethane Glue over steel and aluminum with success. To help the glue bond, the customers had to scrape the metal to create a rough surface, allowing the glue to bond properly.
I’m going to be laying rolls of cork flooring (Corkoleum) that has a rubber backing. The substrate is particle board. Will this adhesive bond rubber to particle board?
Our EZ Polyurethane Adhesive can be used over particleboard.
Will this glue work for adhering your 1/8" rubber flooring to asphalt? I have a picnic area that is asphalt and cracking. It has a roof coving it but has open sides.
Our EZ Polyurethane Adhesive is approved to be used over the following substrates: plywood, Terrazzo, ceramic, concrete, and other existing floor types. So for this type of installation, we wouldn't recommend using our EZ Polyurethane Adhesive.
Does this work well for attaching rubber flooring to concrete? Or is it just for wood floors?
We recommend using our EZ Polyurethane Adhesive to glue our rubber flooring to concrete and other subfloors. Our website and the label on the pail will instruct you on the size trowel you will need to use to accomplish this successfully.
I will be using this overtop concrete. How much will this cover/gallon?
Each gallon can cover anywhere from 20 to 80 sq ft. Please see the "Installation" tab on the product page for detailed information on coverage.
No results found.
prev page 1 ... ... next page
prev page PREV
prev page PREV
NEXT next page
NEXT next page
Average Rating

  Sticky but easy clean up
Verified Purchase
Installed in Outdoor rubber pavers
Allan from Utah wrote...
This is amazing glue. Goes on easy, sticks like a weld, but cleans up easily (if you don't let it set).
  Worked well for the floor
Verified Purchase
Self-installed in Home basement gym
S from Salt Lake, Utah wrote...
adhesive works well but was slightly difficult to put down and took awhile.
All Review Images icon View all customer images
Your item was added to the cart
$0.00 total
reg. $0.00

Standard delivery in 3 business days or less.

1-3 business days delivery time for standard shipping to any of the 48 contiguous states.
Business days include Monday-Friday and exclude national holidays. See our estimated standard delivery map.

Most orders received by 12pm Eastern Time
Monday - Friday ship the same day.

map of shipping transit times
Allow extra time for items that are:
  • 1) large or heavy, requiring freight shipping
  • 2) out-of-stock items
  • 3) shipped to APO/FPO addresses and other U.S. territories
  • 4) shipped to remote addresses