Mohawk Woodlands - American Made Vinyl Planks

Description - Are you looking for a quality, American Made Flooring product? Look no further than Mohawk's Woodlands collection. This wood look vinyl series features deep surface embossing to capture the essence and luxurious feeling of natural hardwood floors, without the attached high dollar price tag. Featuring an 8mil wear layer, these luxury vinyl planks are great for any room of the home, and are sure to add a beautiful touch to any decor. Woodlands planks are backed by a 20 year warranty, so you will love your new flooring for years to come.

Material – Woodlands luxury vinyl planks are made from 100% virgin vinyl and feature a Uniclic locking mechanism

Size – Woodlands Vinyl Planks are 6" x 48".

Thickness – 4.2mm

Wear Layer – 8 MIL (0.2 mm).

Weight – Each case weighs ~29 lbs

Recommended Uses – Woodlands vinyl floor planks have been successfully installed in a variety of spaces in the home, including in basements, as laundry room flooring, as bedroom flooring, in entryways, home offices, and more.

Out of Stock

Luxury Vinyl tiles and planks are easy to keep clean and maintain. Maintenance of the floor typically includes:

Always use plywood or other boards when moving heavy objects across the floor to avoid scratching of the floor surface.
Use felt pads under chair and furniture legs to prevent scratching of the floor surface.
Place walk off door mats at all entrances and doorways to collect debris from shoes such as dirt, rocks, and moisture, from being tracked in and onto your new floors.
Avoid using rubber backed area rugs or floor mats as they can stain the flooring surface over time.
Use non-staining floor protectors underneath heavy furniture, chairs, and tables.
Daily or weekly vacuuming or dust mopping to remove dirt, grit, dust etc. Do not use treated dust mops.
When mopping, use a damp and never a wet mop.
Clean up spill immediately to prevent damage to the floor.

Installation is simple, and is commonly done by our customers. Installation of interlocking vinyl planks is as follows:

Complete any necessary floor prep.
Start with the tongue side facing the wall.
After the initial starter board, press the end seam of the second plank into the end seam of the first plank, and then lock them together by laying the plank down. Continue working left to right.
Install the first plank in the second row by inserting the tongue into the groove of the plank in the first row. This is best done with a low angle of the plank.
Insert the long side seam at a slight angle first. As the top surfaces meet, rotate the plank down into the locked position. Engage the end seam, using a rubber mallet if necessary.
Planks may be cut with a utility knife using the “score and snap” technique, or with the use of a crosscut power saw.
Continue installing planks removing any gaps using a tapping block and a scrap of flooring to cover the tapping block. Be careful not to damage tongue and groove.
Protect all exposed edges by installing wall moulding and/or transition strips. Make sure that no plank will be secured in any way to the subfloor.

For more detailed installation instructions, please Click Here.