Description - Get ready to bounce, baby! Our 15mm Impact Rolls – Designer Series are the perfect floor for anyone who loves to live life on the edge (or maybe just on a really bouncy floor). With a 1/2” rubber underlay, these slip-resistant rubber rolls will make you feel like you're walking on clouds (or at least a really thick yoga mat). And don't worry about mold/mildew growth - these rolls are more resistant than a toddler to broccoli. Plus, with an industry-leading 5-year warranty, you can rest assured that your floor will outlast even your longest Netflix binge session. So what are you waiting for? Bring on the gym, playroom, or even the ultimate trampoline room - our Impact Rolls have got you covered (literally).
Note: Our 15mm Impact Rolls - Designer Series are made in batches, which can lead to color variations when placing multiple orders. Due to this, we recommend ordering more flooring than is needed for mistakes, replacements, and future expansion to keep your floor looking beautiful and consistent.
Material – Recycled rubber and colored EPDM virgin rubber flecks.
Width – Each roll is 4' wide.
Length – The rolls are custom cut to your desired lengths free of charge provided that each roll length is 25’ long or longer and in whole foot increments such as 25’, 26’, 27’, etc. You will normally receive an extra few inches on each roll. This allows for a quick and easy installation.
Thickness – 14.5mm - ±1mm tolerance
Weight – 2.36 Lbs. per sqft.
Recommended Uses – Our 15mm Impact Rolls – Designer Series are versatile enough to be used for both commercial and residential spaces. These durable rubber rolls are a great flooring option for a variety of purposes, including CrossFit and home gyms, high-impact workouts, indoor track surfacing, basement flooring, upstairs playrooms, garage gym flooring, trade show flooring, and more.
Available For Order - Ships between Nov 5 - 19
Designer Series Impact rolls are easy to clean and maintain. To keep the flooring surface free of dust and debris, vacuum as needed. For deeper cleaning, damp mop with a mild soap and water mixture using soaps such as Dawn or Tide.
Note: Do not use solvent or oil-based cleaners such as Pinesol, Lysol, Murphy's Oil Soap, WD40, or paint thinner as they can damage the flooring over time.
For more detailed cleaning instructions and commercial cleaning guidelines, please refer to our cleaning and maintenance instructions.
It is recommended to use an adhesive when installing rolled rubber flooring to prevent the rolls from moving around or sliding apart between adjacent rolls. The two most common methods for adhering rubber rolls to the subfloor are:
A: Double-Sided Tape Installation
- Clean the subfloor to remove all dust, dirt, and debris.
- Loose lay the rolls in the room as desired and let them relax for 24-48 hours.
- Note: Make sure roll colors match and adjust accordingly.
- Make any necessary cuts to the rolls to fit them into the room and leave a gap for expansion and contraction.
- Roll up the rolls at one end of the room and apply double-sided tape to the floor along the perimeter of each roll.
- Place the rubber rolls back into position on top of the double-sided tape.
B: Glue Installation
- Clean the subfloor to remove all dirt, dust, and debris, and make sure it is free of any moisture.
- Loose lay the rolls in the room as desired and let them relax for 24-48 hours.
- Note: Make sure roll colors match and adjust accordingly.
- Make any necessary cuts to the rolls to fit them into the room and leave a gap for expansion and contraction.
- Roll up the rolls at one end of the room and spread a light layer of polyurethane adhesive that is 10 feet long maximum.
- Unroll the flooring into the adhesive 10 feet at a time.
- Repeat the previous step until the entire roll is in place.
- Use a 100-pound roller on the floor to guarantee good adherence to the subfloor, or walk on the flooring in small choppy steps.