Description - HD (High Density) Soft Tiles are a competitively priced high density foam flooring solution great for home gyms and basements. Featuring a textured surface, these interlocking foam tiles are very easy to install and are resistant to mold, mildew and bacterial growth. Being made with closed celled EVA foam makes these tiles a great insulator of sound and warmth. These tiles are very lightweight and are 100% allergen and latex free. Not only are these soft tiles great for your home but they are the perfect flooring option for horse stables.
Note: There may be some surface imperfections and color variation. Also, our Foam products can be punctured by sharp animal nails, rough use, high heels, and moving furniture.
Material – High density closed cell EVA foam.
Size – 2' x 2'.
Thickness – ~10 mm
Weight – Tiles weigh approximately 2.08 Lbs. each.
Recommended Uses – HD Soft Tiles have been successfully used as flooring for home gyms, in basements, as laundry room flooring, under treadmills, as horse stall mats, in man caves, in garage gyms, and much more.
In Stock - Ships between Jan 31 - Feb 1
Installation of interlocking tiles is very simple and typically done by the consumer. Typical installation of these tiles is as follows:
- First, clean your sub floor so it is free of all dirt, grease or debris.
- Start in one corner of the room with a corner tile and add border tiles outward along the adjacent walls. Add center, corner, and border tiles where you see fit.
- When coming up to an opposite wall, make sure you cut the tiles to fit the area leaving a gap that’s roughly the thickness of the tiles being used to account for expansion and contraction of the floor tiles in varied temperature ranges.
Note: When piecing interlocking tiles together, adhesives are usually not used since the weight of the locked together product is usually enough to keep the floor tiles from moving. However, if you do experience movement and would like to ensure that the tiles do not slide at all, some double-sided tape or mat tape can be used around the perimeter of the installation to prevent any movement.