Description - Our 1/2” thick designer soft tiles offer an attractive interlocking foam tile that is available in modern color options designed to match today's fashions. These designer series soft tiles are a premium grade foam tile flooring that has a "softer" than normal surface texture. The extra soft feel makes these tiles perfect for use as baby play mats and kids play room flooring. Each tile includes two detachable edge pieces to help make assembly and/or installation a snap. In addition, each tile is reversible and can be flipped over if another color is desired.
Note: There may be some surface imperfections and color variation. Also, our Foam products can be punctured by sharp animal nails, rough use, high heels, and moving furniture.
Material – Closed cell EVA foam
Size – 2' x 2'.
Thickness – 1/2 Inch nominal (~11mm)
Weight – Each tile weighs approximately 0.75 Lbs.
Recommended Uses – Soft Tiles have been used successfully in home exercise gyms, as inexpensive trade show exhibit flooring, as kids daycare flooring in schools and churches, and day care centers for kid’s play mats, as a fun alternative to carpet in kids bedrooms, in yoga and pilates studios, and in a variety of other locations where an interlocking foam matting would be useful to provide cushion under foot.
In Stock - Ships between Jun 19 - 20
Installation of interlocking tiles is very simple and typically done by the consumer. Typical installation of these tiles is as follows:
- First, clean your sub floor so it is free of all dirt, grease or debris.
- Start in one corner of the room with a corner tile and add border tiles outward along the adjacent walls. Add center, corner, and border tiles where you see fit.
- When coming up to an opposite wall, make sure you cut the tiles to fit the area leaving a gap that’s roughly the thickness of the tiles being used to account for expansion and contraction of the floor tiles in varied temperature ranges.
Note: When piecing interlocking tiles together, adhesives are usually not used since the weight of the locked together product is usually enough to keep the floor tiles from moving. However, if you do experience movement and would like to ensure that the tiles do not slide at all, some double-sided tape or mat tape can be used around the perimeter of the installation to prevent any movement.