Description - Legend carpet rolls are the perfect option for any multi-purpose space, indoors or outdoors. Legend carpet rolls are resistant to fading, staining, and wear and also won't fray, zipper, or unravel. Create the perfect outdoor floor that will stand up to Mother Nature and everything she has to offer.
||100% Solution dyed PET
||28oz per sq yd
||Class I (ASTM E-648)
||Face, stain, wear
Recommended Uses – Legend outdoor carpets are recommended for use throughout the home and also the outdoors, as patios flooring, walkoff areas, in multi season rooms, garage flooring, in entryways and more!
Available For Order - Ships between Sep 28 - Oct 5
Carpet does not require special equipment or cleaning products. Maintaining your carpet is as easy as follows:
- To keep your rooms clean and inviting, carpet should be vacuumed frequently.
- Spills should be removed immediately with an absorbent cotton cloth and clean water.
- Periodic maintenance can be performed as needed using a hot water extraction-cleaning machine (I.E. carpet cleaner).
For more detailed cleaning instructions, please Click Here.
Installation of carpet can be a tricky matter, but we work to make it easy. Below are instructions for the most common methods of installing carpeting.
- Before installing the carpet, make sure the ambient temperature is between 65 and 95 degrees.
- The installation surface must be dry and free of debris.
- Spread adhesive directly on the surface. Not on the back of the carpet. 3/32" x 3/32" x 3/32" V notch trowel.
- Allow adhesive to tack.
- Indoor/Outdoor grade for outdoor use.
- If the glue is not allowed to tack or the humidity is too high, the carpet will not adhere to it.
- Non woven needle punch carpet does not have a non woven backing, so any uncured adhesive may come through the carpet.
- Do not use a roller on this carpet. Roll the carpet using the carpet core or the flat end of a push broom.
- There is a pile direction, so every section must run in the same direction.
- To remove seams, simply rub them with your fingers.
- Excess adhesive can be removed with a mild soap and warm water solution.
- Do not walk on the carpet during or immediately after installation.
- No foot traffic on the carpet for at least 24 hours to allow the adhesive to cure.