Description - Judo will never be more fun or safer than with our 7/8” Judo Mats. These tiles have been specifically designed with shock absorbency in mind and will stand up to the hardest falls. Constructed with a high density EVA foam, these tiles are not only super tough but they are safe providing a surface that is resistant to bacteria and mold growth and are waterproof. These interlocking tiles are available in 4 reversible colors providing you with two floors for the price of one and can be easily installed with the use of 2 detachable edge pieces. These foam tiles also will provide any room with added warmth and sound insulation, making these also great for playrooms and upper level kids rooms.
Note: Foam products can be punctured by sharp animal nails, rough use, high heels, and moving furniture.
Material – Closed cell EVA foam.
Size – 3' x 3' (Note: Tiles do overlap 1” where they lock together)
Thickness – 7/8 Inch Nominal (~20mm)
Weight – Tiles weigh approximately 2 Lbs. each.
Recommended Uses – Our 7/8” Judo Mat has been successfully installed in both commercial and residential areas and can be found as flooring for dojos, martial arts studios, for MMA, as playroom flooring, in basements, as flooring for upper level rooms, in kid's rooms, in home gyms, and anywhere a safe shock absorbent floor is desired.
Installation of interlocking tiles is very simple and typically done by the consumer. Typical installation of these tiles is as follows:
- First, clean your sub floor so it is free of all dirt, grease or debris.
- Start in one corner of the room with a corner tile and add border tiles outward along the adjacent walls. Add center, corner, and border tiles where you see fit.
- When coming up to an opposite wall, make sure you cut the tiles to fit the area leaving a gap that’s roughly the thickness of the tiles being used to account for expansion and contraction of the floor tiles in varied temperature ranges.
Note: When piecing interlocking tiles together, adhesives are usually not used since the weight of the locked together product is usually enough to keep the floor tiles from moving. However, if you do experience movement and would like to ensure that the tiles do not slide at all, some double-sided tape or mat tape can be used around the perimeter of the installation to prevent any movement.