Description - Our interlocking soft jumbo tiles are constructed of high density closed cell foam that is portable, soundproof, waterproof, shock absorbent, and excellent at insulating the user from cold floors. These extra thick and reversible soft tiles offer a great foam flooring solution to users who need a soft flooring option for kids play rooms, martial arts, tumbling, etc. These tiles use a patented interlocking design where each tile has removable edge pieces attached and has the ability to be a center, border, or corner tile. In addition, the soft tile products are 100% allergen free and contain no latex.
Material – Closed cell EVA foam rubber.
Size – 2' x 2' (Note: Tiles do overlap 1” where they lock together)
Thickness – 7/8 Inch nominal (~20 mm)
Weight – Each tile weighs approximately 2 Lbs.
Recommended Uses – Soft foam tiles have been used successfully in kids playrooms, martial arts studios, children’s day care centers, home gyms, for tumbling and other gymnastic evens, as pilates and yoga mats, home exercise rooms, and anywhere else where a cushioning floor tile system would be helpful.
Installation of interlocking tiles is very simple and typically done by the consumer. Typical installation of these tiles is as follows:
- First, clean your sub floor so it is free of all dirt, grease or debris.
- Start in one corner of the room with a corner tile and add border tiles outward along the adjacent walls. Add center, corner, and border tiles where you see fit.
- When coming up to an opposite wall, make sure you cut the tiles to fit the area leaving a gap that’s roughly the thickness of the tiles being used to account for expansion and contraction of the floor tiles in varied temperature ranges.
Note: When piecing interlocking tiles together, adhesives are usually not used since the weight of the locked together product is usually enough to keep the floor tiles from moving. However, if you do experience movement and would like to ensure that the tiles do not slide at all, some double-sided tape or mat tape can be used around the perimeter of the installation to prevent any movement.