Description - Take the beauty of our normal Aged Wood vinyl planks and add a traditional touch by switching it up with mixed Widths. Each carton has 36 sq ft and includes 8 planks of each size, enabling an easy and alternating installation. Aged Woods LVP beautifully mimics the look of worn hardwood, while offering the ease of maintenance associated with vinyl flooring.
Material – A resilient vinyl backing and core topped with a thick commercial grade wear layer and silver nano antimicrobial surface.
Size – Each box contains 3” x 36”, 6” x 36”, and 9” x 36” planks
Thickness – 2.5mm
Wear Layer – 22MIL (0.55 mm)
Weight – Each case weighs ~33 lbs
Recommended Uses – Aged Wood LVP have been installed in a variety of places including kitchens, offices, basements, bedrooms, hotels, boutiques, waiting areas, hallways, dental offices, tv rooms, and more.
Luxury Vinyl Tiles are very easy to keep clean and maintain. Maintenance of the floor typically includes:
- Daily or weekly dust mopping or sweeping may be needed to remove dirt, dust, and debris.
- Make sure to periodically clean exterior and interior floor mats to ensure that tracking of mud, dirt and debris does not persist.
- When mopping floors, make sure to block off areas to be cleaned; they may be slippery until dry.
- Mop the floor clean with a clean mop. Pick up soil and excess solution with a clean mop tightly wrung out. Then you will want to rinse the floor with cold water.
- Let floor dry completely before allowing foot traffic back on the floor.
Installation of luxury vinyl flooring is simple, and is commonly done by our customers. There are two installation methods, depending on the type of environment. For low traffic spaces or non-permanent installations, we recommend the Double Sided Tape Installation method. For high traffic or permanent installations, we recommend the Glue Installation method. Installation of vinyl tiles and planks is as follows:
Double Sided Tape Installation
- For non-permanent or low traffic area installations, the double sided carpet tape method may be preferred.
- Ensure the subfloor is flat, smooth, clean and dust free.
- Measure the room to determine the center line, adjust that center line in either direction to give a balanced width of planks or tiles on each side of the room and to prevent narrow pieces along the wall.
- If installing a square shape tile, start installation in the center of the room. If installing a plank shape, start in the left corner.
- Lay double sided tape around the perimeter of the entire room including cabinets and doorways (roughly 1/4 to ½ inch from the wall). Do not remove paper backing from the perimeter tape.
- For additional security, you may choose to lay additional double sided carpet tape in perpendicular lines with the perimeter of the flooring. Depending on the size of your vinyl tile or plank, you may choose to line up tape underneath seams of your tile or plank, or in repeated increments of your choosing.
- Starting in the corner on the starting wall, remove the paper backing from the perimeter tape of that wall and install the first row of tiles or planks on top of the tape. Be certain this first line is straight and pieces are laid tightly, one against the next.
- Be sure to install tiles or planks running in same direction (arrows are on back of plank).
- For plank installation, start the second row using the piece cut from the last plank of the previous row. This should ensure plank joints have a stagger. Continue installing in this same manner.