Launch Turf Rolls

Price from
$2.37 sqft
SAVE
25%
$28.49 roll
reg: $3.16 sqft
roll: $37.99

Proudly made in the USA
AVAILABLE FOR ORDER
Ships between Dec 12 - 14
Color: roll over image to magnify
Oasis
Sea Grass
Infield
Oasis w/ Cushion Backing
Sea Grass w/ Cushion Backing
Infield w/ Cushion Backing


ENTER ROOM SIZE
Width (ft):
x
Length (ft):
OPTION 1
OPTION 2
Each roll weighs lbs.
Each roll weighs lbs.

Roll Length:
Minimum cut length ft.
Qty:
Roll(s)

Total roll weight: lbs.
Each roll weighs lbs.
Minimum cut length 15ft.
sqft
$
$

Accessories for Launch Turf Rolls
 

Description - Our Launch performance turf is engineered to mimic the look and feel of grass all year round, without the pesky maintenance. These short pile turf rolls require no infill and provide an ideal surface for indoor applications from putting greens to locker rooms. Your indoor turf will be backed with a foam cushion providing shock absorption and thermal insulation allowing it to perform in high traffic areas. The turf layer is made from a polypropylene fiber that provides a turf that is softer than nylon and highly UV stable. Backed by a 5 year warranty these turf rolls will provide a real grass for years to come.
Material – Polypropylene fiber with a synthetic or urethane foam backing.
Width – 12' wide rolls.
Thickness – 3/8" without cushion backing, ~1/2" with cushion backing.
Face Weight – 24 oz.
Weight – .32 Lbs. per square feet.
Recommended Uses – Our Launch turf has been used as flooring in batting cages, baseball dugouts, training facilities, locker rooms, as landscaping, for putting greens, in mini golf areas, Bocce courts, on roof top patios, on decks, and much more.

  • Launch turf rolls ship in 5-7 days and typically deliver in 7-12 business days.
  • An email will be sent automatically with tracking information as soon as your turf flooring ships and tracking information becomes available.

Turf rolls are very easy to clean and maintain. Maintenance for these interlocking tiles typically includes the following:
  • Periodic sweeping of loose dirt, dust, and debris may be necessary to keep the flooring surface clean.
  • For stains and blemishes, clean the rolls with a warm water solution of household detergent and water. Never use bleach.
  • For animal urine, use a mixture of white distilled vinegar in an equal amount of water. Make sure to flush thoroughly and vacuum any excess solution.
  • For chewing gum, the use of dry ice or refrigerant packets may be necessary to remove gum from flooring surface.
  • If your turf becomes matted, brushing of the surface may be needed to restore the aesthetic appearance. Always use a synthetic brush and never a metal or wire bristled brush when performing this task.

Installation of our Turf rolled flooring is very easy and typically done by our customer's. Below are instructions for both outdoor and indoor installation of our rolled flooring.

Glue Down Outdoor Installation
  • First you will want to make sure that your surface is level, clean and dry. Our turf flooring can be installed on concrete, asphalt, pressure treated decking, and composite decking.
  • Next you will want to dry lay your turf to implement roll sequencing to minimize normal variations. Manufacturing details will be backstamped on one side of the backing, this will assist in determining fiber direction.
  • Apply pressure sensitive adhesive or double sided tape and then lay the turf.
  • Apply a bead of seam sealer to all seams.
  • Roll the product with a 75 lb. Weighted roller across the width and length of the product surface.
  • Once completed, the installation much remain in dry conditions for 72 hrs. in order for the adhesive to cure properly.
Non-Infilled Synthetic Lawn Outdoor Installation
    Area Prep
  • First you will want to remove all grasses, sods, mulches, etc from the marked areas. Note: If you are landscaping around trees shubbery, flowers, light poles, utilities, etc., remember to mark around those areas and account for the turf edge configuration. Remember to leave ample area uncovered around the bases of trees.

  • Base Construction
  • It may be necessary to compact the native soil/subgrade prior to base construction.
  • Add a base of crushed rock and level it with a landscaping rake. Ideally, the base should be approximately 3” thick.
  • After spreading, spray with water and use a hand tamp to compact the area. This typically take 2-3 passes. Let the compacted area dry and check for any inconsistencies in the area.

  • Lay Turf
  • Roll the synthetic turf out on top of the constructed base. Note: If the site requires multiple rolls, be sure to have the grain of the fibers on each roll of turf running in the same direction.
  • If using multiple rolls, trim the untufted edge.
  • Around the borders, trim the turf to mat the edges.

  • Gluing The Seam
  • Fold the adjacent trimmed edges of two rolls of turf approximately two feet apart the entire length of the seam.
  • Roll out the seaming tape and apply adhesive with a 1/8” trowel.
  • Center the seaming tape and lay the edges of each roll of turf directly onto the tape making sure not to bury or trap the synthetic grass fibers. Make sure no tape is showing and that the two pieces of turf are butting up against each other so that the joint is invisible.
  • Add weight to the seams and allow time for the adhesive to cure overnight.

  • Secure Turf On Edges And Brush
  • Steak down the turf along the perimeter every three feet or so with landscape spikes.
  • Fibers are usually matted down so use a stiff bristled broom to stand the fibers up.
  • Sand infill is optional.
Glue Down Indoor Installation
  • First you will want to make sure that your surface is level, clean and dry. Our turf flooring can be installed on concrete, dusting, powdering concrete, gypcrete , pressure treated decking, wood, or backer board.
  • Next you will want to dry lay your turf to implement roll sequencing to minimize normal variations. Manufacturing details will be backstamped on one side of the backing, this will assist in determining fiber direction.
  • Apply adhesive or double sided tape and then lay the turf.
  • Apply a bead of seam sealer to all seams.
  • Roll the product with a 75 lb. Weighted roller across the width and length of the product surface.
  • Once completed, the installation much remain in dry conditions for 72 hrs. in order for the adhesive to cure properly.

Highlights

  • No water or fertilizer needed.
  • Easy to maintain.
  • Pet friendly.
  • 5 year warranty.
  • Can be used indoors and out.
Videos

Shipping Video

 

Customer Questions & Answers

Don't see what you're looking for?

Ask a Question

 

Verify that you are human, choose: Man

CANCEL

Want immediate answers?

Live Chat! Get assistance from our sales team! 

Customer Reviews

Turf review
5/5 Launch Turf Rolls
Nick O. from Raleigh, NC
Great customer service! Was my first time purchasing rubber flooring and turf, but not my last from rubberflooringinc. They walked me through the whole process! I did a bunch of browsing and research, and these guys are the best!

RubberFlooringInc- Customer
Did you install it yourself - No
Where did you install it -
Was this helpful? 29 0
Color:
Qty:
$0.00
$0.00
< Return to Product