Description - Ecore at Home's ECOfit Plus rubber tiles are the perfect flooring option for any home or commercial gym and are super DIY friendly. Featuring all the great qualities as the rolled version, these interlocking rubber tiles are great for oddly-shaped spaces as they can be cut to fit anywhere. Helping to enhance your workout while reducing fatigue, these rubber tiles are great for jump training, plyometrics, and much more. Featuring ECOguard, these rubber floor tiles are very easy to clean and sanitize and are backed by a 5-year warranty.
Material – 3.2mm rubber surface layer fusion-bonded to a 15mm composition rubber backing with a factory-applied urethane coating (ECOguard).
Size – 23" x 23".
Thickness – 15.2mm
Weight – 2.4lbs per square foot.
Recommended Uses – Ecore at Home's ECOfit Plus rubber tiles are perfect for any home or commercial gym and have been used as flooring in physical therapy offices, as basement flooring, as flooring in rehab facilities, as flooring behind retail counters, as kitchen flooring, and much more.
Available For Order - Ships between Feb 17 - 24
ECOfit Plus rubber tiles are very easy to clean. Maintenance of these rubber rolls typically includes:
- Vacuuming any loose dust, dirt, or debris from the flooring surface when necessary.
- Occasional damp mopping of the rolls with a pH-neutral cleaner, such as Ecore E-cleaner.
Note: Do not use any solvent or oil style cleaners such as Pinesol, Lysol, Murphy’s Oil Soap, WD40, paint thinner, etc. since these types of cleaners will break down the flooring over time.
For more detailed cleaning instructions and commercial cleaning instructions, Click Here.
Installation of interlocking tiles is very simple and typically done by the consumer. Typical installation of these tiles is as follows:
- First, clean your sub floor so it is free of all dirt, grease or debris.
- Snap a chalk line on the subfloor 24” from one wall in your room. Snap another chalk line on the subfloor 24” from an adjacent wall. You should now have a pair of perpendicular lines making an approximate 90-degree angle.
- Begin laying the interlocking tiles along the chalk lines, snapping the locks together as you go.
- Leave the perimeter of the room open until the field is installed.
- After the field is covered, go back and cut in lines along the walls in the room. Leaving a gap at the wall roughly the thickness of tiles being used is recommended to account for expansion and contraction of the floor tiles in varied temperature ranges.
Note: When piecing interlocking tiles together, adhesives are usually not used since the weight of the locked together product is usually enough to keep the floor tiles from moving. However, if you do experience movement and would like to ensure that the tiles do not slide at all, some double-sided tape or mat tape can be used around the perimeter of the installation to prevent any movement.
For printable installation instructions, please Click Here.