Description - Step right up, folks! US Rubber's Big Chip™ Rubber Rolls are the cure for your color blindness blues. No more squinting to distinguish red from blue chips, because these rolls have got 'em bigger than a Texas-size steak. You'll be the talk of the town with this eye-catching rubber gym floor that'll have everyone asking, "Where'd you get that?!" And forget about slaving over cleaning - this floor practically takes care of itself, leaving you more time to hit the gym and work on your gains. Plus, with a 25-year warranty, you can rest easy knowing your investment is secure. Don't be a little chip in a big world - go Big Chip™ or go home!
Recommended Uses:
- 1/4" - Made for basic home gyms and exercise rooms.
- 8mm - Very durable for home and commercial gyms.
- 3/8" - Most common thickness used in commercial gyms.
- 1/2" - Ultra durable rubber designed for extreme use.
Material – Recycled rubber buffings and large (6-9mm) colored EPDM virgin rubber flecks. Recycled rubber buffings are the “Filet Mignon” of the recycled rubber industry since they are the cleanest, strongest, and most consistent raw material as compared to some of the cheap recycled crumb rubber alternatives available.
Width – Each roll is 4 feet wide.
Length – The rolls are custom cut to your desired lengths free of charge provided that each roll length is 15’ long or longer and in whole foot increments such as 15’, 16’, 17’, etc. You will normally receive an extra few inches on each roll. This allows for a quick and easy installation.
Thickness – Available in 1/4", 8mm, 3/8", and 1/2".
Weight – 1/4" rolls weigh approximately 1.5 Lbs. per square foot., 8mm rolls weigh approximately 1.9 Lbs. per square foot, 3/8" rolls weigh approximately 2.3 Lbs. per square foot, and 1/2" rolls weigh approximately 2.5 Lbs. per square foot.
Recommended Uses – Big Chip™ Rubber Rolls are a versatile flooring option that can be used in a variety of settings. Their durable construction makes them ideal for home gyms and high-traffic walkways, while their slip-resistant surface provides excellent traction for commercial gyms and garage gym flooring. They're also perfect for basements, multi-use areas, and any space that requires a resilient and easy-to-maintain flooring solution. With their striking color chip design and 25-year warranty, Big Chip™ Rubber Rolls are sure to impress wherever they're installed.
Available For Order - Ships between Apr 26 - May 3
Big Chip™ Rubber Rolls are designed for easy maintenance and cleaning. Follow these simple steps to keep your rubber flooring looking great:
- Regularly vacuum or sweep loose dust, dirt, or debris from the surface of the rubber rolls as needed.
- Occasionally damp mop the rolls with a mild soap and water solution. We recommend using Dawn dish detergent and/or Tide laundry detergent.
- Avoid using any solvent or oil-based cleaners, such as Pinesol, Lysol, Murphy's Oil Soap, WD40, paint thinner, or similar products, as they can break down the rubber flooring over time.
Note: For more detailed cleaning instructions and commercial cleaning recommendations,
click here.
Big Chip Rubber Rolls Installation Instructions
When installing Big Chip™ Rubber Rolls, it is essential to use an adhesive to prevent the rolls from moving around or sliding apart between adjacent rolls. Here are the two most common methods for adhering rubber rolls to the subfloor:
A: Double-Sided Tape Installation
- First, clean your subfloor thoroughly to remove any dust, dirt, or debris.
- Loosely lay out the rolls in the room as you would like them to appear after the installation. Allow the rolls to relax for 24-48 hours to ensure proper installation.
- Note: Rolls may be directional, so make sure the colors match on each roll. If the roll colors do not match, flip them or turn them 180 degrees to ensure color consistency.
- Cut the rolls to fit the room's shape using a straight edge and a utility knife with a fresh blade. Leave a gap around the rolls roughly the thickness of the rolls being used to allow for expansion and contraction.
- Roll up the rubber rolls at one end of the room. Apply double-sided tape to the floor along the perimeter of each roll.
- Place the rubber rolls back into position on top of the double-sided tape.
B: Glue Installation
- First, clean your subfloor thoroughly to remove any dust, dirt, or debris. Additionally, it is recommended that the subfloor is free of any moisture before gluing your flooring down.
- Loosely lay out the rolls in the room as you would like them to appear after the installation. Allow the rolls to relax for 24-48 hours to ensure proper installation.
- Note: Rolls may be directional, so make sure the colors match on each roll. If the roll colors do not match, flip them or turn them 180 degrees to ensure color consistency.
- Cut the rolls to fit the room's shape using a straight edge and a utility knife with a fresh blade. Leave a gap around the rolls roughly the thickness of the rolls being used to allow for expansion and contraction.
- Roll up the rubber rolls at one end of the room. Spread a light layer of polyurethane adhesive that is 10’ long (maximum) and unroll the flooring into the adhesive 10’ at a time.
- Repeat this step for every 10 feet of length.
64,550+ Verified Reviews
Over 200 Million Sqft
30 Day Money Back
Price Match
Free Samples
