★★★★★
Highest Rated + Most Reviewed
Over 500,000 customers and 27,000 product reviews
8am-8pm EST Monday-Friday
10am-7pm EST Saturday

Complete Your Order
Contact Us
 
8am - 8pm EST Monday - Friday
10am - 7pm EST Saturday
 

Slate Flex Tiles Reviews

 
Slate Flex Tiles
Price from
$4.00/sqft
$54.00 Case
reg: $5.33 sqft
case $72.00
 
We'd love your feedback!
 
Average Rating 4.8/5
 
 

Customer Reviews

results 1-20 of 40
1 2 3
 
Easy to install....fun to use!
Self-installed in garage
from Northern California wrote...
I decided to turn my 3 car garage into a gym....but still have the ability to use it as a garage. Slate Flex Tile was the perfect choice for flooring. Two of us installed it in one day.

RubberFlooringInc- Customer
RubberFlooringInc- Customer
 
My utility room
Self-installed in Utility room
from Forked River, NJ wrote...
I needed a resilient and durable floor in my utility room. I have seven giant breed dogs (Newfoundlands and Great Pyrenees) and normal wear and tear on any other floor surface other than tile or slate is accelerated. These Slate Flex tiles went down impeccably and I put a bead of silicone sealant down along all the seams before tapping them in place. It provided a waterproof joint and excess silicone in the seam peeled right off after a few hours. The surface has provided good traction for the dogs and clean up is simple with just a damp sponge mop. I am seriously considering putting this resilient flooring down throughout the major traffic patterns in my house, it's that good!!!
 
Perfect Solution
Self-installed in Basement
from Tacoma, WA wrote...
Here are some before and afters. I'm so pleased it looks and feels great !!! Perfect solution for a basement.

RubberFlooringInc- Customer
RubberFlooringInc- Customer

RubberFlooringInc- Customer
RubberFlooringInc- Customer
 
Easy as pie
Self-installed in Basement
from Boston, MA wrote...
We are finishing a basement and wanted a durable, easy to install floor. Carpet is a no-no (been there done that), if you ever have any water problem, even a small one the carpet has to be pulled. Wood is a no-no for same reason. We preferred not to have to install a sub-floor so that left tile out --- and tile is cold in basement. A floor with some insulating factor is a great plus in a basement. We were going to go with a floating floor cork tile then stumbled on slate flex rubber floor. Met all the criteria, floating installation, some insulating factor and impervious to any water. Installed it in the bathroom yesterday. It was an easy installation, even in a bathroom where there was lots of cutting to fit around shower, toilet drain, etc. It looks great, not as high end as cork or tile would have looked but very good for what it is. We will be putting silicone sealant around the seam where the tile meets the shower, on all other edges we installed a baseboard on top of the tile to cover the expansion gap. I am giving the product a 4 (not a 5) because I do not yet have enough experience with how it holds up over time.
 
Slate Flex Tile
Self-installed in Laundry Room
from Stanwood, Michigan wrote...
Good product so far. I installed it in our laundry room. If it wears good I'm happy. Looks good. Easy to install. Good company to work with.
 
New Laundry Room Floor
Self-installed in Laundry room
from Garfield Heights, Ohio wrote...
I found the flooring on the internet and looked at a lot of tiles but choose the Slate Flex Tiles. The order arrived early (Thursday just before Easter) and the floor was installed by Sunday. The hardest decision was how to start because the room is not square. Once that was determined the tiles went in very easily except for the intricate cuts required around the bathroom. My wife gave me a suggestion that worked very well to cut the cardboard boxes to the 18 X 18 tile size and use them to create a template for the actual tile. It worked great. The tiles only assemble one way and that caused some concern about having enough tiles because cutting off 12 inches from one side can not be used on the other. I finally found a way to cut the pieces at the correct spot to use the wide cutoff pieces in other ways. The only issue is the seams won't line up any more, but since it was on edges behind the washer and dryer it did not make and difference. Finding a way to use cut edges was key for me to get the job done with the tiles I purchased with only 3 full tiles to spare. Everyone likes the job and it solved my floor problems in the room without repainting every couple years.

RubberFlooringInc- Customer
RubberFlooringInc- Customer
RubberFlooringInc- Customer
RubberFlooringInc- Customer
 
Great Product
Self-installed in Bathroom
from Alabama wrote...
This tile was used in a much older home where the floors had some flex in them so whatever went down in the bathroom had to give a little bit. Cuts easily with a sharp utility knife and goes down very easily. The bathroom floor where it was used looks great. I would recommend this product to others and intend to order more for the utility room since the bathroom turned out so well.
 
Stair project.
Self-installed in Stairs and stair turnaround.
from San Diego, CA wrote...
I removed the carpeting from my stairs and replaced it with wood risers and brown Slate Flex tiles for the treads and stair turnaround. I decided to use the Slate Flex tiles instead of wood treads/flooring for the stair treads and stair turnaround after receiving a sample and deciding it would offer better grip for my two large dogs to get up and down the stairs while still looking good. So far it looks great, the dogs can get up and down pretty easily and it is holding up very well. I left the flooring for the turnaround as a “floating” floor, it stays in place nicely with the inter locking feature and the side walls holding it in place (with a proper gap) , the stair treads are interlocked and cut to fit (10” x 40” step tread), then bonded (using flexible adhesive) and nailed in a few places using a 18 gauge brad nails from a nail gun with the pressure set correctly.

RubberFlooringInc- Customer
 
Looks Great!
Self-installed in Basement
from Highland, NY wrote...
The floor looks great! Thanks.

RubberFlooringInc- Customer
RubberFlooringInc- Customer
RubberFlooringInc- Customer
 
new basement
Self-installed in basement
from Bellmore, NY wrote...
great product. neat and clean floor after Sandy rebuild.
 
Very Happy
Self-installed in Kitchen
from Pompano Beach, FL wrote...
Very Happy!
RubberFlooringInc- Customer
 
Good product and responsive customer service
Self-installed in Kitchen, breakfast room
from Akron Ohio wrote...
I had tiles in my kitchen from another company. The white ones were a pain to keep clean. The original company no longer made 18x18 tiles that I could replace with a darker color. Two years later I had to do something. I found Slate Flex Tiles who sent me samples, allowed me to buy 1 tile to see if it would interlock (which it did) and then order an odd number of replacement tiles I needed. Thank you Slate Flex Tile for saving my kitchen floor. The dark gray tiles look fabulous with my older light gray ones and are a breeze to keep clean.
 
The new office
Self-installed in Office, bath, closet
from Camarillo, CA wrote...
This was the last room to be remodeled in our late 50's home. The house was moved to the site in 1961 and needless to say, we have some issues in the house with the "not so flat" sub-flooring. This product was the answer to the "issues" we had. 2 days and the install was complete (did it myself). Take your time, be patient and measure twice. We covered the office, into an attached Bath and walkin closet. The floor is laying flat on a not so flat floor and no lifting at any seams. It's easy to clean and so far, shows no marks. The only down side is the noise from the office chair rolling across a textured surface. 3 quick install tips: 1, change blades often on the box cutter or tile knife. It will make the cutting cleaner and much easier. 2, Place an old white sock over the head of the rubber mallet used to set the seams. This will not only help the mallet slide a little, but prevent it from making any black marks on the tiles. 3. Order more than you think you need. There is lots of waste due to the tile being installed in one direction only. Great product.
 
Great floor covering.
Self-installed in Garage
from Niagara Falls, NY wrote...
I have been wanting to do something with my peeling and cracked garage floor for a couple of years now. I used that paint with the specks but it didn't really stick well on some spots. I used a patching cement on some cracks but it just made some rough patches. Sanding and refinishing was almost $3000. So I was watching I Want That and it had these tiles. We thought about it for about 2 minutes and went on their site, figured out how may tiles and what colors and some pattern. A few days later it arrived. Took 2 of us a couple of days since the floor's not really flat. A nice flat floor would be quicker. I used a multi tool to make cuts. Really easy. Now, I have a living room floor in my garage that's easy to clean and looks great. I would do it again!!!
 
Great bathroom floor
Self-installed in bathroom
from Pulaski, VA wrote...
I needed something for my bathroom floor that would be easy and quick. This was the best choice by far. I love the floor. It looks great. I would recommend it to anyone.
 
Garage flooring makeover
Self-installed in 3 car garage
from Cedarburg, WI wrote...
After having terrible results using the "epoxy" solution, I saw the flex slate tiles on HGTV and decided to give it a try. Well, after a day and a half, my 3 car garage looks great. Installation was easy, the hardest part was cutting the tiles. I would have given the rating 5 stars, but I still have to see how the tiles hold up to the Wisconsin winter.

RubberFlooringInc- Customer
RubberFlooringInc- Customer
 
Sturdy with good looks
Self-installed in attached covered patio
from New Iberia, LA wrote...
With two large dogs we were looking for a durable floor for our covered patio. After discussing our options with a service rep, we opted for the vinyl slate tiles. Turned out to be an excellent choice, looks great, a little tougher to cut with a utility knife, but worth the effort. Threw the paint roller away!
 
Hallway in Beach House
Self-installed in First level hallway/laundry room
from Corolla, NC wrote...
This was our second purchase of this product. We have a vacation home on OBX and did a remodel recently leaving the vinyl flooring in downstairs hallway looking very bad. It is glued down to concrete so a nightmare to remove so we used the Slate Flex to go on top of it. It is thin enough to avoid issues with thresholds, heavy enough to stay put when laid down, and tough enough to stand up to the wet and sandy feet that walk on it. Easy to clean up and in the unlikely event it is damaged then a piece can be pulled up and replaced. This is a perfect product for the climate etc. and it looks really good on the floor. We bought an electric shear/cutter to assist in the long cuts and it made fitting a breeze.
 
Man Cave Complete!
Self-installed in Tuff Shed
from Orem, UT wrote...
I bought a Tuff Shed and finished it myself, wired, insulated and drywalled. It came with a composite wood product floor that needed to be covered. A buddy of mine recommended Rubber Flooring Inc. I ordered the slate floor after looking at their sample. It came via truck within a week. The floor went down super easy! I have a Shopsmith I used to trim in the side tiles. I dialed in a slow blade speed and had no problems with melting as I cut the tiles. Made installation super easy and quick. My son and I got the floor down in about 4 hours in my 12x16 shed. I am really happy with the result!! It looks awesome and was exactly what I wanted. I did have left over tiles, but I'll save them in case of an accident in the future. These folks are great to work with! The floor is not inexpensive, but you get what you pay for. The old saying, "Good products aren't cheap, and cheap products aren't good!!" certainly applies here.
 
Great Product!
Self-installed in Garage - Home Gym
from Arlington, Texas wrote...
I bought this product to finish out a Garage renovation. I could not be happier. This DIY project went off without a hitch.
results 1-20 of 40
1 2 3