Customer Questions
Don't see what you're looking for?
How many ft are covered by your seam sealer tubes?
Justin
This is one of the most asked questions when it comes to this product. So depending on the width and depth of the joint you are filling depends on how many linear feet it will cover. To see a graph of this, please see the installation tab on the product page.
Does this sealant come in clear? How long does it last? Can it be used in the seams of wood flooring to provide a moisture proof barrier?
Linda
Our Seam Sealer comes in Black only, and it will last as long as you keep your flooring installed. Our seam sealer does provide a moisture proof barrier.
Exactly how and when is the sealer applied? Can it be done in such a way so as not to have the mats glued to the floor? How long does it take to set up?
Mark Jacobsen
Our Seam Sealer is applied similarly to caulk. You just place small beads of glue at the seams between flooring pieces. This can be used as an alternative to using standard glue. Our Seam Sealer glue is a polyurethane glue, so depending on the moisture content in the air, depends on how quickly the flooring will cure. The more moisture the faster it will cure, the less the longer it takes. Typically the glue will set in 2-24 hours.
Can you use when installing on a cement floor?
Rob
You can use our Seam Sealer glue on a cement floor. This glue is a polyurethane glue that is colored black.
Is this a good substitute for double-sided tape to keep joints between rolls from opening up?
Jeffrey Hildebrand
Our Seam Sealer is a great alternative to double-sided tape to keep your flooring seams from separating. When using this, you will place the glue between the two flooring surfaces. We recommend following the instructions on the tube to install out seam sealer glue properly.
How noticeable is this? I've got a 1/8" gap and would like to make it "disappear." I've got the black with blue specs flooring.
David C Peters
Since our Seam Sealer glue is black, it is not super noticeable at all. Also, since it is used to fill in the gaps, you won't really see any of the glue on top of the floor.
I just bought 4 mats of 4' x 6' from you. It is for an indoor gym I am making in my garage on concrete floor. Do you recommend that I get some glue to lay it down?
Tore Steen
You don't have to glue our mats down when using them as a gym floor. If you want, you can glue them down with one of our polyurethane glues, or you can use our Double Sided Carpet Tape for a less permanent install. If you want to create a more water resistant install, we would recommend using our Seam Sealer glue along the seams of the mats. Depending on the type of mat purchased, you may need to also apply our Rubber Floor Finish and Sealer.
Some of my seams aren't cut perfectly. Can I use this to hide those imperfections?
Kelvin Jackson
Yes, our Seam Sealer glue can be used to hide the imperfections between two rubber rolls.
Can this be used as an adhesive for your rolled rubber flooring? I've got a small area of your rubber rolls that I need to re-adhere to my concrete floor.
Jared
Yes, our Seam Sealer glue can be used to glue down our rubber flooring. This glue is the same as our other polyurethane adhesives. The only difference is that it's colored black.
I am going to be installing 3 rolls of 1/2 inch rubber flooring with double-sided carpet tape around the perimeter to keep it in place. I want to add the 1/2 ramp--do I just leave some overlap of the carpet tape on the edges in the width of the ramp? Or should I be gluing the ramp to the side of the rubber roll?
Mark D Erickson
You can either use the double-sided carpet tape to the ramp in place or use our Seam Sealer glue under the ramp to keep it in place. You won't need to glue the ramp to the flooring.
No results found.
1
...
...
