Our 5/8” Soft Tiles - Seconds are interlocking soft tiles at discounted prices. These tiles are a great foam flooring solution, however, they may have slight imperfections and they have been classified by our quality control team as factory seconds. Typical imperfections or manufacturing defects include slight color variations from tile to tile, small pitting, and other minor surface imperfections. Seconds are sold at bargain pricing and are the perfect flooring solution for our price conscious customers not focused heavily on appearance. These foam tiles are still waterproof, shock absorbent, insulating, and are 100% allergen free and contain no latex. This steal of a deal Tile Seconds are final sale and cannot be returned.
Note: Due to the nature of foam, our foam products can be punctured under rough use, high heels, moving furniture, and there may be slight color variation.
Material – Closed cell EVA foam rubber
Size – 2' x 2' (Note: Tiles do overlap 1.125” where they lock together)
Thickness – 5/8 Inch nominal (~14mm)
Weight – Tiles weigh approximately 1.25 Lbs. each.
Recommended Uses – Soft Tiles have been used successfully in home exercise or fitness rooms, as pilates and yoga mats, as kid’s play room flooring, and any other area where long periods of standing occur and/or a cushioned flooring system would be useful.
Installation of interlocking tiles is very simple and typically done by the consumer. Typical installation of these tiles is as follows:
- First, clean your sub floor so it is free of all dirt, grease or debris.
- Start in one corner of the room with a corner tile and add border tiles outward along the adjacent walls. Add center, corner, and border tiles where you see fit.
- When coming up to an opposite wall, make sure you cut the tiles to fit the area leaving a gap that’s roughly the thickness of the tiles being used to account for expansion and contraction of the floor tiles in varied temperature ranges.
Note: When piecing interlocking tiles together, adhesives are usually not used since the weight of the locked together product is usually enough to keep the floor tiles from moving. However, if you do experience movement and would like to ensure that the tiles do not slide at all, some double-sided tape or mat tape can be used around the perimeter of the installation to prevent any movement.