Description - Our Eco-Soft + Foam Tiles are the perfect lightweight foam flooring option for any occasion! They’re kid-safe. non-toxic, and 100% free of any allergens, latex, or phthalates. Made of closed-cell EVA foam, these foam tiles are resistant to water, mold, and mildew growth, and provide insulating and anti-fatigue properties.
Each tile comes with two removable edge pieces. You can install them as either a wall-to-wall flooring for a finished look or as a floating mat anywhere you’d like. They’re a best-selling choice for use in sensory rooms, kids’ bedrooms, and all types of creative spaces. You can even use them in basements, home gym spaces, enclosed patios, and as trade show flooring. Check out our customer favorite Eco-Soft + Foam Tiles to see what everyone is excited about!
Note: Foam tiles may have some color variation and can be punctured by sharp items such as animal nails, rough use, high heels, and moving furniture.
Material – Closed cell EVA foam.
Size – 2' x 2'.
Thickness – ~11mm
Weight – Tiles weigh approximately 1.00 Lb. each.
Recommended Uses – Eco-Soft + tiles have been installed successfully in basements, playrooms, as light duty home gym flooring, as temporary portable flooring, in bedrooms, as trade show flooring, in childcare facilities, and anywhere a soft foam flooring surface is desired.
In Stock - Ships between Aug 15 - 16
Installing these interlocking tiles is very simple and usually done by the consumer. Typical installation of these tiles is as follows:
- First, clean your subfloor so it is free of all dirt, grease, or debris.
- Start in one corner of the room with a corner tile and add border tiles outward along the adjacent walls. Add center, corner, and border tiles where you see fit.
- When coming up to an opposite wall, make sure you cut the tiles to fit the area leaving a gap that’s roughly the thickness of the tiles being used to account for expansion and contraction of the floor tiles in varied temperature ranges.
Note: When piecing interlocking tiles together, adhesives aren’t usually needed since the weight of the product is usually enough to keep the floor tiles from moving. However, if you do experience movement and would like to ensure that the tiles do not slide at all, you can use some double-sided tape or mat tape around the perimeter of the installation to prevent any movement.