Description - Our 6mm Energy Rubber Tiles – Olive Green are the perfect low cost rubber tile for any home gym, basement, or light duty commercial gym. Available in center cut tiles, these interlocking rubber tiles are very easy to install and maintain and can be ordered in any amount. Backed by a 5 year warranty, these tiles can be easily installed as flooring for a whole room or as a stand alone mat.
Material –Black recycled rubber and virgin colored rubber flecks.
Size – 24" x 24" (Note: Tile do overlap 1.125" where they lock together)
Thickness – 6mm (Approx. 1/4")
Weight – Each tile weighs approximately 5 Lbs.
Origin – Made in the USA
Recommended Uses – 6mm Energy Rubber Tiles - Olive Green are an excellent floor tile for use as flooring for light commercial gyms, home gyms, basements, play areas, garage gyms, patios, porches, decks and much more.
6mm rubber tiles are very durable as well as easy to maintain and keep clean. Maintenance for interlocking gym tiles include:
- Vacuum any loose crumbs, dust or debris from the flooring surface when necessary.
- Occasionally, you will want to use a damp mop with a mild soap and water solution. Recommended soaps are Dawn dish detergent or Tide laundry detergent.
Note: Do not use any solvent or oil style cleaners such as Pinesol, Lysol, Murphy’s Oil Soap, WD40, paint thinner, etc. since these types of cleaners will break down the flooring over time.
For more detailed cleaning instructions and commercial cleaning instructions, Click Here.
Installation of interlocking tiles is very simple and typically done by the consumer. Typical installation of these tiles is as follows:
- First, clean your sub floor so it is free of all dirt, grease or debris.
- Snap a chalk line on the sub floor 24” from one wall in your room. Snap another chalk line on the subfloor 24” from an adjacent wall. You should now have a pair of perpendicular lines making an approximate 90-degree angle.
- Begin laying the interlocking tiles along the chalk lines, snapping the locks together as you go.
- Leave the perimeter of the room open until the field is installed.
- After the field is covered, go back and cut in tiles along the walls in the room. It is recommended to leave a gap along the wall roughly the thickness of the tiles being used to account for expansion and contraction of the floor in varied temperature ranges.
Note: When piecing interlocking tiles together, adhesives are usually not used since the weight of the locked together product is usually enough to keep the floor tiles from moving. However, if you do experience movement and would like to ensure that the tiles do not slide at all, some double-sided tape or mat tape can be used around the perimeter of the installation to prevent any movement.
For printable installation instructions, please Click Here.