Description – ProStep Dance Floor Rolls are the perfect low-cost solution to your roll-out dance flooring needs. These Marley rolls are perfect for ballet, contemporary dance, lyrical, jazz, hip hop, and more. These dance rolls are perfect for any skill level and can be used in the home or studio. This high-quality dance roll has a controlled slip matte surface finish to keep your dancers safe. Order your dance flooring in the length that you need so that installation is a breeze.
Material – High-quality resilient vinyl sheet.
Width – 63" wide
Length – Available in pre-cut full roll sizing at 60' long or as custom cut. Custom cut rolls are cut to your desired length free of charge and in whole foot increments such as 11’, 12’, 13’, etc. You will normally receive an extra few inches on each roll. This allows for a quick and easy installation.
Thickness – ~1.2 mm
Installation – Temporary or Semi-Permanent
Floor Speed – Medium-Fast (Note: The black side provides slightly more slip resistance than the gray side)
Shoe Style – Soft (ballet, pointe, modern, jazz, soft tennis soles)
Use With – Vinyl Tape, Double Stick Tape, Heavy Duty Cleaner and All-Purpose Cleaner
Recommended Uses – ProStep Dance Floor is recommended for use in the home or studio, for ballet, jazz, and more. It is excellent for touring companies or permanent installation in the home or studio.
In Stock - Ships between Dec 8 - 12
Vinyl rolls are easy to clean and maintain. Cleaning of this flooring typically includes:
- Sweeping or vacuuming any loose crumbs, dust, or debris from the floor when necessary.
- Light damp mopping to remove light staining or spills. Remove scuffs and excessive soil by carefully scrubbing.
- Avoid prolonged exposure to direct sunlight, as discoloration may occur. We recommend closing blinds or drapes during peak sunlight hours to prolong the life of the floor.
Note: This is not a stain-proof product. Leaving certain harsh chemicals or spills on the floor for an extended period may cause some staining and/or damage. Always clean up a spill immediately to reduce the chance of staining or other damage to your flooring.
When installing rolled vinyl dance flooring, it is recommended that you use some kind of adhesive to prevent the rolls from moving around or sliding apart between adjacent rolls. The most common method of keeping your Marley dance floors to the subfloor in place is:
A: Double Sided Tape Installation
- First, you will want to clean your subfloor so that it is free of all dust, dirt, and debris.
- Loose lay your rolls in the room as you would like them to look after a complete installation. Let the rolls relax for up to 24-48 hours to ensure proper installation of your new flooring.
- Make any necessary cuts to the rolls to fit them into the room using a Straight Edge and a Utility Knife with a fresh blade. We recommend leaving a 1/4" gap around the rolls to account for expansion and contraction.
- You can either apply double-sided carpet tape to the underside of each roll around the roll perimeters. Then place the vinyl rolls back into position on top of the double-sided tape.
- Or you can use mat tape to secure rolls to the floor from the top, as well as joining multiple rolls together.
Note: It is normal to receive an extra few inches on each roll. This allows for potential material contraction from the time it is cut to the time of installation. Be sure to let product properly acclimate prior to installation.