Pacific Artificial Ivy Wall Panel

In Stock - Ships between Oct 11 - 15

• Hose or wipe ivy with water to clean as needed.
• Use soap or detergent to clean stubborn dirt or stains.
• Use paint thinner as needed for graffiti.
• Use a CLR cleaner if ivy has white calcium stains from water overspray.

• Determine how much surface area needs to be covered.
• Use scissors or a carpet knife to trim the panel to fit the surface area as needed.
Installation Instructions for Chain Link Fence:
• Use green or black zip ties to attach the panels every 4" around the perimeter and every 4" throughout the complete surface area of the panel.
• Cut off excess zip tie overage.
Installation Instructions for Wood Fence:
• Use wood screws and a washer to attach the panels to the wood fence every 4" around the perimeter and every 4" throughout the complete surface area of the panel.
• Make sure to not use wood screws longer than the thickness of the wood fence.
Installation Instructions for Concrete, Cinder Block or Stucco:
• Use a hammer drill to drill a hole for the screw using a carbide or titanium drill bit.
• Use a screw designed for concrete, cinder block or stucco.
• Put a washer on the screw to hold the panel against the surface every 4" around the perimeter and every 4" throughout the complete surface area of the panel.