Intensify Turf Rolls

Price from
$2.87 sqft
SAVE
25%
$34.49 linear foot
reg: $3.83 sqft
linear foot: $45.99

Proudly made in the USA
AVAILABLE FOR ORDER
Ships between Oct 7 - 11
Color: roll over image to magnify
Pine Green
Pine Green w/ Cushion Backing


ENTER ROOM SIZE
Width (ft):
x
Length (ft):
OPTION 1
OPTION 2
Each roll weighs lbs.
Each roll weighs lbs.

Roll Length:
Minimum cut length ft.
Qty:
Roll(s)

Total roll weight: lbs.
Each roll weighs lbs.
Minimum cut length 15ft.
sqft
$
$

Accessories for Intensify Turf Rolls
 

Description - Our Intensify turf rolls are a thicker version of our Launch line. Just like our Launch turf rolls, these rolls can be installed indoors and out. The non cushion backed version is best for outdoor installations, whereas the cushioned backed version is better for indoor applications. These rolls are very easy to install and are much easier to care for than natural grass. Intensify is great for pets and will not attract bugs and other pests like grass. So if you are looking for an easy to maintain alternative to natural grass, then our Intensify turf is the perfect product for you.
Material – Polypropylene fiber with a urethane unitary backing or a urethane foam backing.
Width – Each roll is 12' wide.
Thickness – The unitary backed version is ~1/2" thick and the urethane foam backed version is ~3/4" thick.
Face Weight – 35 oz.
Weight – .40 lbs. per square foot.
Recommended Uses – Intensify turf rolls are great for both indoor and outdoor use and have been used as flooring for doggy day cares, as putting greens, as landscaping, on decks, in cross fit gyms, in dug outs, as batting cage flooring, and much more.

  • Intensify turf rolls ship in 5-7 busineess days and typically deliver in 7-12 business days.
  • An email will be sent automatically with tracking information as soon as your turf rolls ship and tracking information becomes available.

Intensify rolls are very easy to clean and maintain. Maintenance for these turf rolls typically includes the following:
  • Periodic sweeping of loose dirt, dust, and debris may be necessary to keep the flooring surface clean.
  • For stains and blemishes, clean the rolls with a warm water solution of household detergent and water. Never use bleach.
  • For animal urine, use a mixture of white distilled vinegar in an equal amount of water. Make sure to flush thoroughly and vacuum any excess solution.
  • For chewing gum, the use of dry ice or refrigerant packets may be necessary to remove gum from flooring surface.
  • If your turf rolls become matted, brushing of the surface may be needed to restore the aesthetic appearance. Always use a synthetic brush and never a metal or wire bristled brush when performing this task.

Installation of our Turf rolled flooring is very easy and typically done by our customer's. Below are instructions for both outdoor and indoor installation of our rolled flooring.

Glue Down Outdoor Installation
  • First you will want to make sure that your surface is level, clean and dry. Our turf flooring can be installed on concrete, asphalt, pressure treated decking, and composite decking.
  • Next you will want to dry lay your turf to implement roll sequencing to minimize normal variations. Manufacturing details will be backstamped on one side of the backing, this will assist in determining fiber direction.
  • Apply pressure sensitive adhesive or double sided tape and then lay the turf.
  • Apply a bead of seam sealer to all seams.
  • Roll the product with a 75 lb. Weighted roller across the width and length of the product surface.
  • Once completed, the installation much remain in dry conditions for 72 hrs. in order for the adhesive to cure properly.
Non-Infilled Synthetic Lawn Outdoor Installation
    Area Prep
  • First you will want to remove all grasses, sods, mulches, etc from the marked areas. Note: If you are landscaping around trees shubbery, flowers, light poles, utilities, etc., remember to mark around those areas and account for the turf edge configuration. Remember to leave ample area uncovered around the bases of trees.

  • Base Construction
  • It may be necessary to compact the native soil/subgrade prior to base construction.
  • Add a base of crushed rock and level it with a landscaping rake. Ideally, the base should be approximately 3” thick.
  • After spreading, spray with water and use a hand tamp to compact the area. This typically take 2-3 passes. Let the compacted area dry and check for any inconsistencies in the area.

  • Lay Turf
  • Roll the synthetic turf out on top of the constructed base. Note: If the site requires multiple rolls, be sure to have the grain of the fibers on each roll of turf running in the same direction.
  • If using multiple rolls, trim the untufted edge.
  • Around the borders, trim the turf to mat the edges.

  • Gluing The Seam
  • Fold the adjacent trimmed edges of two rolls of turf approximately two feet apart the entire length of the seam.
  • Roll out the seaming tape and apply adhesive with a 1/8” trowel.
  • Center the seaming tape and lay the edges of each roll of turf directly onto the tape making sure not to bury or trap the synthetic grass fibers. Make sure no tape is showing and that the two pieces of turf are butting up against each other so that the joint is invisible.
  • Add weight to the seams and allow time for the adhesive to cure overnight.

  • Secure Turf On Edges And Brush
  • Steak down the turf along the perimeter every three feet or so with landscape spikes.
  • Fibers are usually matted down so use a stiff bristled broom to stand the fibers up.
  • Sand infill is optional.
Glue Down Indoor Installation
  • First you will want to make sure that your surface is level, clean and dry. Our turf flooring can be installed on concrete, dusting, powdering concrete, gypcrete , pressure treated decking, wood, or backer board.
  • Next you will want to dry lay your turf to implement roll sequencing to minimize normal variations. Manufacturing details will be backstamped on one side of the backing, this will assist in determining fiber direction.
  • Apply adhesive or double sided tape and then lay the turf.
  • Apply a bead of seam sealer to all seams.
  • Roll the product with a 75 lb. Weighted roller across the width and length of the product surface.
  • Once completed, the installation much remain in dry conditions for 72 hrs. in order for the adhesive to cure properly.

Highlights

  • UV stable.
  • Indoor/Outdoor turf.
  • Pet friendly.
  • Easy to install and maintain.
  • 5 year warranty.
Videos

Shipping Video

 

Customer Questions & Answers

Don't see what you're looking for?

Ask a Question

 

Verify that you are human, choose: House

CANCEL

Want immediate answers?

Live Chat! Get assistance from our sales team! 

Customer Reviews

Great product for gyms!
5/5 Intensify Turf Rolls
Dana from Baltimore, md
Very pleased with the addition of this turf to my fitness studio. Durable, looks great and very effective!!!

RubberFlooringInc- Customer
RubberFlooringInc- Customer
Did you install it yourself - Yes
Where did you install it - Fitness studio
Was this helpful? 8 0
Color:
Qty:
$0.00
$0.00
< Return to Product