Description - Regrind flooring tiles are an extremely low cost, easy to install, and they are a durable rubber flooring solution for just about any project. These tiles are made from our post industrial recycled rubber that is naturally made during the production of our standard recycled rubber products. Regrind rubber tiles are extremely dense due to the use of this reground material in their manufacturing process. If you are looking for the lowest cost rubber flooring tile available that is perfect for your home gym or even your commercial gym, this is it. These regrind tiles are even guaranteed with our industry leading 5 year warranty, so buy with confidence.
Material - Regrind Tiles are made from the post industrial recycled rubber created during the production of our standard rubber products.
Size - 24” x 24” (25" x 25" if detachable edge pieces are included - Note: Tiles do overlap 1” where they lock together)
Thickness - Available in 1/4" and 8 mm thickness (approx. 5/16")
Weight - 6 lbs (1/4" Tiles) or 8 lbs (8mm Tiles)
Origin - Made in the USA
Recommended Uses - Regrind Tiles have been used successfully as flooring for home gyms, personal training studios, locker rooms, commercial weight rooms, basements, dog kennel flooring, ski lodge flooring, ice rink facilities, and many other applications. These tiles give you that perfect balance between being inexpensive and the exceptional durability that your flooring needs deserve.
Regrind Tiles are easy to clean and maintain. Maintenance of this recycled rubber flooring tile typically includes:
- Vacuuming any loose dust, dirt, or debris from the rubber surface when necessary.
- Occasional damp mopping of the rubber tiles with a mild soap and water mixture. Some soaps commonly used include Dawn dish detergent and/or Tide laundry detergent.
Note: Do not use any solvent or oil style cleaners such as Pinesol, Lysol, Murphy’s Oil Soap, WD40, paint thinner, etc. since these types of cleaners will break down the flooring over time.
For more detailed cleaning instructions and commercial cleaning instructions, Click Here.
Installation of interlocking tiles is very simple and typically done by the consumer. Typical installation of these tiles is as follows:
- First, clean your sub floor so it is free of all dirt, grease or debris.
- Snap a chalk line on the sub floor 24” from one wall in your room. Snap another chalk line on the subfloor 24” from an adjacent wall. You should now have a pair of perpendicular lines making an approximate 90-degree angle.
- Begin laying the interlocking tiles along the chalk lines, snapping the locks together as you go.
- Leave the perimeter of the room open until the field is installed.
- After the field is covered, go back and cut in lines along the walls in the room. Leaving a gap at the wall roughly the thickness of tiles being used is recommended to account for expansion and contraction of the floor tiles in varied temperature ranges.
Note: When piecing interlocking tiles together, adhesives are usually not used since the weight of the locked together product is usually enough to keep the floor tiles from moving. However, if you do experience movement and would like to ensure that the tiles do not slide at all, some double-sided tape or mat tape can be used around the perimeter of the installation to prevent any movement.
For printable installation instructions, please Click Here.