Description - Rebound Playground tiles have been designed with safety in mind. These playground tiles come in 4 different thicknesses offering a wide range of fall heights for any playground equipment. This playground flooring comes in 4 standard colors that are sure to add pop to any playground area. These tiles can be installed with a polyurethane adhesive and installed over many surfaces. Not only can these tiles be installed outdoors, but they can be installe in indoor play areas and around climbing walls. Rebound rubber tiles are water permeable which means that water will flow freely through the tiles, reducing the possibility of a slipping hazard. Beveled edges and corners are also available which help to reduce the tripping hazard that is naturally inherent with this type of flooring. Playground tiles are a great alternative to wood mulch or rocks and offer a safe, solid, durable surface for children to play on. Rebound tiles also feature a long 10 year warranty.
Material – Recycled rubber, and paint are the primary materials. Standard painted solid colors (blue, red, and green) can fade in the sunlight overtime like any rubber product however these colors are designed to provide the most attractive and durable outdoor painted tile surface available.
Size – Tiles are 24” x 24”, Ramp edges are 12" x 48". Outside corners are 12" x 24" x 24" for 1.75", 2.5", and 4" and 10.5" x 24" x 24" for 3.5". Inside corners are 12" x 24" x 24" for 1.75", 2.5" and 4" and 10.5" x 24" x 24" for 3.5".
Thicknesses – 1.75" thick (3 foot fall height rating), 2.5" thick (6 foot fall height rating), 3.5” thick (8 foot fall height rating), and 4" thick (10 foot fall height rating)tiles are available.
Weight – 1.75" and 2.5" thick tiles weigh 28 pounds each and 3.5” and 4' thick tiles weigh 31 pounds each.
Recommended Uses – Rebound tiles can be found in use in school and public park playgrounds, in private community playgrounds, in skateboard parks, in private community play areas for children, as soft and safe deck and patio flooring, on rooftops, in day care centers, as outdoor walk ways and paths, as a safer floor surface for use under indoor rock climbing
walls and any other place where a fall absorbing playground or general rubber surface would be beneficial.
Rebound playground mats are virtually maintenance free. No daily maintenance is required normally however if you do feel the need to clean the surface of the playground flooring, normal recommended cleaning instructions include:
- Sweeping or blowing off the rubber tiles to remove any loose crumbs, dirt, dust, sticks, leaves, or other debris from the surface when necessary.
- If something wet or sticky is spilled on the surface such as drinks, ice cream, etc, it is best to clean up the area with a water hose or else a damp cloth.
- Occasional damp mopping of the playground tiles with a mild soap and water solution and disinfecting of the tiles with a bleach and water or alcohol and water solution can be useful to help prevent the transmission of colds if kids are sick. A few recommended soaps are Dawn dish detergent or Tide laundry detergent.
Note: Do not use any solvent or oil style cleaners such as Pinesol, Lysol, Murphy’s Oil Soap, WD40, paint thinner, etc. since these types of cleaners will break down the rubber playground surface over time.
- All thicknesses of our Rebound Playground Tiles are recommended to be installed with adhesive over concrete, asphalt, or compacted subsoil. Installation with adhesive is recommended to prevent theft.
If you would like further explanation or help determining exactly what you will need to complete your installation, please call one of our friendly customer service staff members at 800-613-0996.