Description - Our Designer Series rubber playground tiles have been designed with safety in mind. These playground tiles come in 6 bright and bold colors that are sure to brighten up any playground area. Our Rebound Designer Series tiles can be installed with a polyurethane adhesive and can be installed over many surfaces. These safety tiles are water permeable and have superior traction in both wet and dry conditions. Our designer series tiles also offer fall height ratings up to 10 feet and they are IPEMA certified. Our Rebound tiles come with a long 10 year warranty and can be used in both indoor and outdoor applications. Beveled edges and corners are available for these tiles, which will help to reduce the tripping hazard that is inherent with these tiles. So if you are looking for a super durable, high color, ultra safe playground surface, then our Rebound Designer Series Tiles are for you.
Material – Designer series Recoil tiles use a recycled rubber base combined with a ¼” thick top surface of EPDM virgin rubber flecks to provide more color options and ensure the greatest life expectancy available in playground flooring tiles.
Size – Tiles are 24” x 24”, Ramp edges are 12" x 48". Outside corners are 12" x 24" x 24" for 1.75", 2.5", and 4" and 10.5" x 24" x 24" for 3.5". Inside corners are 12" x 24" x 24" for 1.75", 2.5" and 4" and 10.5" x 24" x 24" for 3.5".
Thicknesses – 1.75" thick (3 foot fall height rating), 2.5" thick (6 foot fall height rating), 3.5” thick (8 foot fall height rating), and 4" thick(10 foot fall height rating)tiles are available.
Weight – 1.75" and 2.5" thick tiles weigh 31 pounds each and 3.5” and 4' thick tiles weigh 37 pounds each.
Recommended Uses – Rebound Designer Series Tiles can be found in use in school and public park playgrounds, in private community playgrounds, in skateboard parks, in private community play areas for children, as soft and safe deck and patio flooring, on rooftops, in day care centers, as outdoor walk ways and paths, as a safer floor surface for use under indoor rock climbing
walls and any other place where a fall absorbing playground or general rubber surface would be beneficial.
Rebound Designer Series interlocking playground mats are virtually maintenance free. No daily maintenance is required normally however if you do feel the need to clean the surface of the playground flooring, normal recommended cleaning instructions include:
- Sweeping or blowing off the rubber tiles to remove any loose crumbs, dirt, dust, sticks, leaves, or other debris from the surface when necessary.
- If something wet or sticky is spilled on the surface such as drinks, ice cream, etc, it is best to clean up the area with a water hose or else a damp cloth.
- Occasional damp mopping of the playground tiles with a mild soap and water solution and disinfecting of the tiles with a bleach and water or alcohol and water solution can be useful to help prevent the transmission of colds if kids are sick. A few recommended soaps are Dawn dish detergent or Tide laundry detergent.
Note: Do not use any solvent or oil style cleaners such as Pinesol, Lysol, Murphy’s Oil Soap, WD40, paint thinner, etc. since these types of cleaners will break down the rubber playground surface over time.
- All thicknesses of Rebound Designer Series Playground Tiles are recommended to be installed with adhesive over concrete, asphalt, or compacted subsoil. Installation with adhesive is recommended to prevent theft.
If you would like further explanation or help determining exactly what you will need to complete your installation, please call one of our friendly customer service staff members at 800-613-0996.