Description - The best in home gym flooring has come to RubberFlooringInc in Training Ground with Nike Grind. Being the premiere rubber gym tile on the market today, Training Ground with Nike Grind rubber tiles are certain to withstand the toughest of home gym environments. Durable enough to be used in light commercial gyms, these rubber gym tiles are backed by a 5 year warranty. Each tile consists of a multi-colored confetti pattern that can be mixed and matched to create a truly one-of-a-kind flooring surface. Needing no adhesive or tape, Training Ground with Nike Grind tiles are a breeze to install, needing only a sharp utility knife and T-Square to fit around corners and walls. Not only are these interlocking tiles built to last, they are also very Green, consisting of 90% recycled material. With each tile consisting of so much recycled material, each full installation can potentially earn your construction project up to 7 LEED points. Everyone wants the best, and with Training Ground with Nike Grind you will truly have the best.
– Training Ground with Nike Grind tiles are constructed with approx. 65 percent finely refined post-consumer SBR rubber and 25 percent pre-consumer Nike Grind rubber. For Information on Nike Grind, please visit http://www.nikegrind.com/.
Size – 24” x 24” (Note: Tiles do overlap 1.125” where they lock together).
Thickness – 6mm thick (approx. 1/4") and 8mm thick (approx. 5/16").
Weight – 6mm tiles weigh approximately 5 Lbs and 8mm tiles weigh approximately 8 Lbs.
Origin – Made in the USA.
Recommended Uses – Being a premiere rubber tile, Training Ground with Nike Grind interlocking rubber tiles are perfect for both home gyms and light duty commercial gyms. With such a high level of durability, these tiles are also very versatile and have been used in basements, playrooms, kitchens, laundry rooms, dens, man caves, garage gyms, indoor patios, dog kennels, rec rooms, and much more.
Training Ground with Nike Grind tiles are extremely durable and easy to maintain. Maintenance of these interlocking tiles typically includes:
- Vacuuming any loose crumbs, dust, or debris from the flooring surface when necessary.
- Occasional damp mopping of the rubber tiles with a mild soap and water solution. A few recommended soaps are Dawn dish detergent or Tide laundry detergent.
Note: Do not use any solvent or oil style cleaners such as Pinesol, Lysol, Murphy’s Oil Soap, WD40, paint thinner, etc. since these types of cleaners will break down the flooring over time.
For more detailed cleaning instructions and commercial cleaning instructions, Click Here.
Installation of interlocking tiles is very simple and typically done by the consumer. Typical installation of these tiles is as follows:
- First, clean your sub floor so it is free of all dirt, grease or debris.
- Snap a chalk line on the sub floor 24” from one wall in your room. Snap another chalk line on the subfloor 24” from an adjacent wall. You should now have a pair of perpendicular lines making an approximate 90-degree angle.
- Begin laying the interlocking tiles along the chalk lines, snapping the locks together as you go.
- Leave the perimeter of the room open until the field is installed.
- After the field is covered, go back and cut in lines along the walls in the room. Leaving a gap at the wall roughly the thickness of tiles being used is recommended to account for expansion and contraction of the floor tiles in varied temperature ranges.
Note: When piecing interlocking tiles together, adhesives are usually not used since the weight of the locked together product is usually enough to keep the floor tiles from moving. However, if you do experience movement and would like to ensure that the tiles do not slide at all, some double-sided tape or mat tape can be used around the perimeter of the installation to prevent any movement.
For printable installation instructions, please Click Here.