Description - Our Stall Mat tiles have been designed for users who are looking for a high density foam gym flooring solution at competitive prices. These interlocking foam tiles are easy to install and maintain and are waterproof. Insulating well against sound, these foam gym tiles are perfect for use underneath treadmills, stationary bikes, and more. Lightweight and portable, these shock absorbent soft tiles are 100% allergen free and contain no latex.
You may notice a slight odor as you open the box or lay these out. It is normal and will dissipate quickly. Rest assured, IncStores foam has been extensively tested and certified to be free of latex and other hazardous chemicals. These test results are available for your review upon request.
Note: Foam products can be punctured by sharp animal nails, rough use, high heels, and moving furniture.
Material – High density closed cell EVA foam.
Size – 2' x 2' (Note: Tiles do overlap 1.375” where they lock together)
Thickness – 3/4 Inch Nominal (~20mm)
Weight – Tiles weigh approximately 3.4 Lbs. each.
Recommended Uses – Interlocking Stall Mats have been used successfully as foam gym flooring in home gyms, as temporary or portable horse stall mats, as trade show flooring, in basements, in garage gyms, in man caves, and in any other location where a dense foam floor surface would be beneficial.
Installation of interlocking tiles is very simple and typically done by the consumer. Typical installation of these tiles is as follows:
- First, clean your sub floor so it is free of all dirt, grease or debris.
- Start in one corner of the room with a corner tile and add border tiles outward along the adjacent walls. Add center, corner, and border tiles where you see fit.
- When coming up to an opposite wall, make sure you cut the tiles to fit the area leaving a gap that’s roughly the thickness of the tiles being used to account for expansion and contraction of the floor tiles in varied temperature ranges.
Note: When piecing interlocking tiles together, adhesives are usually not used since the weight of the locked together product is usually enough to keep the floor tiles from moving. However, if you do experience movement and would like to ensure that the tiles do not slide at all, some double-sided tape or mat tape can be used around the perimeter of the installation to prevent any movement.