These 3/4” interlocking soft rubber tile remnants are a perfect if you are in need of a no-slip mat that also provides cushion underfoot with added durability. Shock absorbent, waterproof, and sound proof, these tiles tiles are functional in a variety of spaces. These low cost interlocking tiles come with two removable edge pieces, allowing each tile to function as either a center, corner, or border tile. These remnant tiles are durable just like our regular soft rubber tiles, but are offered at a lower cost. Remnants are sold as is and are non-returnable.
Material – Recycled rubber top layer bonded to a closed cell EVA foam rubber base.
Size – 2' x 2' (Note: Tiles do overlap 1.875” where they lock together)
Colors – Available in black with grey flecks.
Thickness – 3/4 Inch nominal (~18mm)
Weight – Each interlocking mat weighs approximately 4.00 Lbs.
Recommended Uses – Our soft foam rubber remnant tiles can be used for home gym matting, for trade show flooring, and in daycare centers as kid’s play mats, and in a variety of other locations where durable and cushioned tile would be useful to provide comfortability and traction. These tiles are not recommended for commercial gym use or other areas where weights are used.
Installation of interlocking tiles is very simple and typically done by the consumer. Typical installation of these tiles is as follows:
- First, clean your sub floor so it is free of all dirt, grease or debris.
- Start in one corner of the room with a corner tile and add border tiles outward along the adjacent walls. Add center, corner, and border tiles where you see fit.
- When coming up to an opposite wall, make sure you cut the tiles to fit the area leaving a gap that’s roughly the thickness of the tiles being used to account for expansion and contraction of the floor tiles in varied temperature ranges.
Note: When piecing interlocking tiles together, adhesives are usually not used since the weight of the locked together product is usually enough to keep the floor tiles from moving. However, if you do experience movement and would like to ensure that the tiles do not slide at all, some double-sided tape or mat tape can be used around the perimeter of the installation to prevent any movement.