Description - These carpet tiles are as durable as they are beautiful. Constructed of 3m scotchgard polyester fibers that are needle punched into EVA foam rubber. Wondering what this really means for you? Commercial grade carpet tiles that are waterproof, lightweight, and shock absorbent. The needle punched fibers give you a surface that is soft enough to reduce fatigue from standing, yet firm enough to resist punctures. With the simple interlocking design you will quickly be on your way to reaping the benefits of these soundproofing and insulating carpet tiles. .
Material – 3M Scotchguard coated polyester fibers (over 2 million per square meter) needle punched into closed cell EVA foam rubber for unmatched durability.
Size – 2' x 2'.
Thickness – 5/8 Inch nominal (~14mm)
Weight – Tiles weigh approximately 1.70 Lbs. each.
Recommended Uses – 5/8” Soft Carpet Tiles have been used as flooring for trade shows, as flooring for high traffic areas, as basement flooring, as flooring for kids playrooms, as flooring for retail areas, and any other areas a puncture resistant, insulating carpet tile is desired.
Installation of interlocking tiles is very simple and typically done by the consumer. Typical installation of these tiles is as follows:
- First, clean your sub floor so it is free of all dirt, grease or debris.
- Start in one corner of the room with a corner tile and add border tiles outward along the adjacent walls. Add center, corner, and border tiles where you see fit.
- When coming up to an opposite wall, make sure you cut the tiles to fit the area leaving a gap that’s roughly the thickness of the tiles being used to account for expansion and contraction of the floor tiles in varied temperature ranges.
Note: When piecing interlocking tiles together, adhesives are usually not used since the weight of the locked together product is usually enough to keep the floor tiles from moving. However, if you do experience movement and would like to ensure that the tiles do not slide at all, some double-sided tape or mat tape can be used around the perimeter of the installation to prevent any movement.