Description - Our 5/8” thick reversible soft tiles offer a premium reversible foam floor covering. These attractive foam tiles are economical and offer the added benefit of being reversible so where each tile can be flipped over and become a different color. These soft foam flooring tiles are constructed of premium grade closed cell EVA foam which means that they are also waterproof, sound proof, shock absorbent, and insulating in addition to being light weight and portable. Another feature these tiles come with is a patented interlocking design where each tile has removable edge pieces attached and has the ability to be a center, border, or corner tile.
Note: Due to the nature of foam, our foam products can be punctured under rough use, high heels, moving furniture, and there may be slight color variation.
Material – Closed cell EVA foam
2' x 2' (Note: Tiles do overlap 1.5” where they lock together)
Colors – Available in reversible: Grey/Black, Blue/Red, Black/Brown, Black/Green, and Burgundy/White.
Thickness – 5/8 Inch nominal (~14 mm)
Weight – Each tile weighs approximately 1.35 Lbs.
Recommended Uses – Soft Tiles have been used successfully as home gym flooring, as comfortable trade show flooring, as kids daycare play area flooring, in day care centers as kid’s play
mats, as a fun alternative to carpet in kids bedrooms, in yoga and pilates studios, and in a variety of other locations where an interlocking foam matting would be useful to provide cushion under foot.
Installation of interlocking tiles is very simple and typically done by the consumer. Typical installation of these tiles is as follows:
- First, clean your sub floor so it is free of all dirt, grease or debris.
- Start in one corner of the room with a corner tile and add border tiles outward along the adjacent walls. Add center, corner, and border tiles where you see fit.
- When coming up to an opposite wall, make sure you cut the tiles to fit the area leaving a gap that’s roughly the thickness of the tiles being used to account for expansion and contraction of the floor tiles in varied temperature ranges.
Note: When piecing interlocking tiles together, adhesives are usually not used since the weight of the locked together product is usually enough to keep the floor tiles from moving. However, if you do experience movement and would like to ensure that the tiles do not slide at all, some double-sided tape or mat tape can be used around the perimeter of the installation to prevent any movement.