Description - Berber carpet topped with a rubber underlay for added support and comfort make our Berber Rubber tiles the perfect flooring option for any trade show booth, basement, gym or office. Easy to clean and maintain, these flooring tiles are a great alternative to standard broadloom flooring. These commercial grade carpet tiles are very easy to install with use of a sharp utility knife and straight edge and can be mixed to create custom and unique flooring patterns. Backed by a 5 year warranty and resistant to mold and mildew growth, these modular carpet tile squares are guaranteed to be safe and last for many years to come.
Material – 100% fiber weave polyester wear layer made from recycled plastic bottles over a recycled SBR rubber backing.
Size – 23” x 23” (Note: Tiles do overlap 1.125” where they lock together)
Thickness – 8 mm thick (approx. 5/16")
Weight – Each rubber tile weighs approximately 4 Lbs.
Origin – Made in the USA.
Recommended Uses – Berber Rubber tiles have been used successfully in both commercial and residential applications. These carpet tile squares have been used in trade show booths, home gyms, basements, basements, bedrooms, offices, commercial gyms, entryways, high traffic areas, daycare facilities, hotels, lobbies, senior homes, hospitals, museums, and much more.
Berber Carpet tiles are very durable as well as easy to maintain and keep clean. Maintenance for interlocking gym tiles include:
- To keep your rooms clean and inviting, carpet tiles should be vacuumed frequently.
- Spills should be removed immediately with an absorbent cotton cloth and clean water. For tough stains, you can also easily remove any floor carpet tile to better clean the tile and then easily replace it.
- Periodic maintenance can be performed as needed using a hot water extraction-cleaning machine (I.E. carpet cleaner). Carpet tiles have a backing that prevents water from penetrating or harming the tiles.
For detailed cleaning instructions and commercial cleaning instructions, please Click Here.
Installation of interlocking tiles is very simple and typically done by the consumer. Typical installation of these tiles is as follows:
- First, clean your sub floor so it is free of all dirt, grease or debris.
- Snap a chalk line on the sub floor 24” from one wall in your room. Snap another chalk line on the subfloor 24” from an adjacent wall. You should now have a pair of perpendicular lines making an approximate 90-degree angle.
- Begin laying the interlocking tiles along the chalk lines, snapping the locks together as you go.
- Leave the perimeter of the room open until the field is installed.
- After the field is covered, go back and cut in lines along the walls in the room. Leaving a gap at the wall roughly the thickness of tiles being used is recommended to account for expansion and contraction of the floor tiles in varied temperature ranges.
Note: When piecing interlocking tiles together, adhesives are usually not used since the weight of the locked together product is usually enough to keep the floor tiles from moving. However, if you do experience movement and would like to ensure that the tiles do not slide at all, some double-sided tape or mat tape can be used around the perimeter of the installation to prevent any movement.
For printable installation instructions, please Click Here.