Complete Your Order
Contact Us
 
8am - 8pm EST Monday - Friday
10am - 7pm EST Saturday
Please note: trim images are an example of shape and size. Images are not necessarily specific to this particular product. Moldings are not created to be an exact match, but as a complement to the overall color & finish of the floor. Grain and color variation should be expected.

Rubber Floor Ramps

Visual representation of average product rating from all associated reviews using stars
47 reviews
Our Sale Price
Sale price: $57.32 each
 
Available For Order - Ships between Apr 11 - 16
Select a Color
BlackRubber Floor Ramps
Dark GrayRubber Floor Ramps
BrownRubber Floor Ramps
Burnt UmberRubber Floor Ramps
FawnRubber Floor Ramps
SlateRubber Floor Ramps
ToffeeRubber Floor Ramps
CamelRubber Floor Ramps
SmokeRubber Floor Ramps

Select an Option

Product Highlights

  • Come in two different thicknesses: .25" for 4-6mm rubber and .375" for 7-9mm rubber.
  • Each transition ramp is 12' long.
  • Made from PVC plastic.

** Please note, this is an example of trim shape and size. Images are not necessarily specific to this particular product



  • Come in two different thicknesses: .25" for 4-6mm rubber and .375" for 7-9mm rubber.
  • Each transition ramp is 12' long.
  • Made from PVC plastic.
  • Made in the USA.
  • Product construction changed in September 2019. Previously ordered product will look different.
Description – Our Rubber Flooring Ramps are constructed of homogeneous PVC and provide safe transitions from one surface to another. Our edging comes in two different sizes, .25” and .375”, and can be used with our 4-6mm flooring or our 7-9mm flooring respectively. These strips can be installed with a polyurethane adhesive and can be cut to fit with a sharp utility knife. Our transition strips are also ADA compliant.
Material – Our ramps are constructed of homogenous PVC plastic.
Color – Black
Length – Both sizes are 12' long.
Width – The 4mm-6mm ramp is 2-5/8" wide and the 7mm-9mm is 1-5/16" wide.
Thickness – The 4mm-6mm ramp is 1/4" and the 7mm-9mm ramp is 5/16" thick.
Weight – ~3.99 Lbs. & ~4.4 Lbs. respectively
Recommended Uses – Rubber Floor Ramps can be used in any area where there is a difference in height. These strips have been used in homes, gyms, airports, commercial stores, entryways, nursing homes, schools, hospitals, and offices.

Available For Order - Ships between Apr 11 - 16

Rubber Floor Ramps are very easy to install. Installation instructions are as follows:
  • First, you will need to do is choose the appropriate size for your thickness of rubber. (4-6mm = .25", 7-9mm = .375")
  • Once you have the appropriate size strip, you can insert the rubber into the groove.
  • Next cut the transition strip to fit the desired area and then adhere it to the subfloor with a polyurethane adhesive.
Don't see what you're looking for? 
Does it work with the 3/8" Heavy Duty Rubber Rolls? 3/8" is actually 9.5mm and wondering if it will go that large?
Jeff Smith
Our Rubber Floor Ramps will work with our 3/8" Heavy Duty Rubber Rolls.
Which size should be ordered to use with your 1/4" thick Regrind Rolls?
Zach
The size ramp you would use for our 1/4" thick Regrind Rolls is our 4-6mm Ramp. 1/4" is approximately 6mm in metric measurements.
I have 1" Fuji Tatami mats and need to add approx. 40' of transition ramps to stop the mats from shifting forward. How are the rubber floor ramps secured to the concrete floor below?
mike
You can secure our Rubber Floor Ramps to the concrete with double-sided​ tape or with a pressure sensitive adhesive.
Does The 7-9 mm ramp works with the 3/4" thick rubber mat?
Monty
Our 7-9mm Rubber Floor Ramp will not fit on our 3/4" thick rubber mats.
What is the best method to cut this ramp material, I am trying to cut 45 deg angles and finding it to be difficult, I tried a miter box and saw but it binds or pinches causing resistance and making it very had to cut.
Anonymous
The best way to cut our Rubber Floor Ramps is to use a band saw. If you don't have a band saw, a sharp utility knife can be used with a straight edge. Several scores will need to be made to get through with this method.
Will the ramps work with the 1/2 inch rubber rolls?
Anonymous
Our Rubber Floor Ramps will not work on a 1/2" thick roll.
Does the 7-9 mm ramp work with 1/2" thick rubber pavers (mat)?
Anonymous
The 7-9m ramp would not work with our 1/2" thick products. A 1/2" is ~12mm.
do they make a transition for 1 inch thickness rubber matting?
Matt
Our Rubber Floor Ramps transition only up to 9mm
Would this work to transition from a 3/4" mat down to a 3/8" mat?
Frank
You can use our Rubber Floor Ramps to transition from a 3/4" mat to a 3/8" thick mat. You will want to use our 7-9mm thick ramp. Some changes will need to be made to make this ramp work for your application.
I am looking for a transition for a 1 3/8" mat. Will this work?
Myke Epps
Our Rubber Floor Ramps can be used with flooring 3/8" thick and thinner.
What size will rubber floor ramp work with a 3/4" mat?
Brian f Bechtel
Currently, we do not have a Rubber Floor Ramp that will fit a 3/4" tile.
Can you tell me if this product is UL listed approved. Thanks
Ryan
Our Rubber Floor Ramps are not UL listed.
What centimeter thickness would best fit a .50" thick rubber floor gym tile?
Anonymous
Our Rubber Floor Ramps are not thick enough to be used for 1/2" thick flooring. You would have to purchase our 1/2" Rubber Floor Ramps for that thick of a product.
How far does the ramp extend beyond the edge of the floor for the 0.375" thick ramp? I see that the width is 3" and it looks like half of the ramp slides under the flooring, so I'd guess that 1.5" extends out from the flooring edge?
Reed
Our 4-6mm ramp sticks out about a 1/2" longer than the floor, and our 7-9mm ramp sticks out about 1-1/2" from your floor.
Do you have a rubber transition ramp for a 3/8" rubber floor transitioning to a 7/8" tile bathroom floor?
Stanley Parker III
We don't have a threshold made of rubber that can be used for this, but you could get a threshold constructed with tile that can be used to achieve what you are looking to do. You can check out all the options we have on our Trims and Moldings page.
If my 8mm floor is contained so that it won't move, is it still recommended to glue these ramps? Will it work to place glue in the groove so that it attaches to the rubber flooring? Thanks.
Eric
We recommend gluing the ramps to keep them in place. Doorways and entrances get a lot of traffic, so the ramps have a higher chance of moving. You can use double sided tape under the ramps if you so choose. We don't recommend placing glue inside the ramp groove as the flooring may not connect properly with the ramp.
Hello. I have 1" 2x2 rubber tiles. would this product work with them? Thank you
Unfortunately, we do not have a ramp for that thickness.
I need a transition strip for 12mm rubberized flooring.
Susan Cox
You can get a 12mm Rubber transition strip with our 1/2" Rubber Floor Ramps.
Will your floor ramp work with your 5/8" rubber flooring?
Mendy weinberger
Our Rubber Floor Ramps will not work with our 5/8" flooring. The thickest thickness that these ramps will work with is 3/8"
If we install the rubber flooring with your double faced tape, can the ramp be installed with it also? If not, how much Poly adhesive would be needed for around 100 LF of rubber floor ramps?
Rod Girkin
You can install the Rubber Floor Ramps with double-sided tape. If the ramps were to come up for any reason, we recommend using our Seam Sealer glue to hold them down. It's very similar to caulk and would help to keep the ramps down permanently.
How do I keep my rubber ramp in place?
When using our ramps in areas with moderate to heavy traffic, we recommend using double-sided tape under the ramps to help keep them in place. If the ramps were to move still, we recommend using some adhesive under the ramps. You would want to use a pressure sensitive adhesive.
How long is this strip for $37.99?
Marcia DeVrires
Our Rubber Floor Ramps are 12' long.
Do you have one that fits 1/2 inch rubber flooring?
Richard Kitzer
We do offer a Rubber Floor Ramp for our 1/2" thick rubber products. The 1/2" version is called 1/2" Rubber Floor Ramps.
Can I use it with 1' MMA mats?
Tony
Our Rubber Floor Ramps can't be used with our 1" MMA Mats. We offer ramps for these tiles which are available on the product page.
Can this transition strip hold up to being used at the end of a garage application with a car driven on it daily?? The strip will only be exposed to the the outside only when the door is open. Thank you!
Eddy Valenz
Yes you can use our rubber floor ramps in this application.
Can this be used outdoors (garage door lip)?
You can use our Rubber Floor Ramps outdoors as a garage door lip. You will need to glue the ramp down with our Seam Sealer glue to keep it in place.
I have a wood floor and do not want to glue down the ramp. Is there an alternative way to attach the rubber floor ramp to my 8mm rubber flooring?
Keith
You don't have to glue our Rubber Floor Ramps down. You can also use our double-side tape to hold our rubber floor ramps in place.
How do I transition from 3/8" or 1/2" rubber flooring to 1/4" flooring that is butted up against each other?
Adam J
To transition between different height floors, we recommend purchasing a T-Mold. With this trim, you can fix it so that it fits over both floor heights.
Is the PVC in the floor ramps rigid or flexible?
Debra Schrotz
Our Rubber Floor Ramps are flexible but still have some rigidity. When you receive them, the ramps will come coiled.
We do not want to glue the ramp to our floor as the installation instructions suggest. What type of adhesive can be used to bond the 7mm-9mm ramp to rubber flooring in lieu of the subfloor?
The other option to keep our Rubber Floor Ramps in place is to use our Seam Sealer glue at the point where the ramp and the flooring meet.
No results found.
prev page 1 ... ... next page
prev page PREV
prev page PREV
NEXT next page
NEXT next page
Average Rating
Visual representation of average product rating from all associated reviews using stars
4.7/5.0

Visual representation of product rating from review using stars
  Nice finishing touch
Self-installed in Home garage
Jim Moscardini from Gainesville, VA wrote...
Very nice way to edge my rubber tiled garage floor. They would be perfect if they ″Latched″ onto the tiles instead of needing to be glued.
Visual representation of product rating from review using stars
  Won’t stay, but helpful
Self-installed in Home gym
Anonymous from Radford, VA wrote...
I’ve stubbed my toes on the edges of mats far too much to not try this. The ramp helps prevent the toe stubbing but it doesn’t fit snug or clip in place. Therefore, it comes off too easily and constantly.
Visual representation of product rating from review using stars
  Great Product
Self-installed in home gym
Rob from White Plains, NY wrote...
Easy to cut with tin snips, makes the tile installation totally look professional, clean and provides for safe transition. Great customer service too.
All Review Images icon View all customer images
Your item was added to the cart
Color:
Qty:
$0.00 total